I am getting the car back together and I am really struggling with getting the driver's side window to roll up and down properly. Starting form the rolled up position, the trailing edge of the window wants to drop as I roll it down. Then from the down position the opposite happens, the leading edge binds leaving the trailing edge to go up first. I have tried adjusting where the crank assembly attaches to the glass with no luck. Other suggestions? The car is a '75.
Check to see if the rear vertical guide bracket has all the bottom screws intact.
Missing the guide rollers?
Close Travis. I figured it out. One of the rollers that goes into the guide that is mounted to the door slipped out. got it back in and it seems to have solved the problem. Couldn't see it out of place until I got a mirror in there. Thanks for the advice all.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)