Printable Version of Topic
914World.com _ 914World Garage _ GB- The original window scrapers
Posted by: Mikey914 Aug 16 2013, 02:17 AM
Stoddard has contracted with me to make these and I have their permission to make these available. They are the original design for the window scrapers that has been discontinued for decades. They were superseded with a 911 scraper.
Stoddard is adding some of my stuff to their site and I've been making 356 and 911 parts for them for some time now. They provided an original for me to produce these. I have to sell these at $8.50 each ($17 a set) as per our agreement, but there are only 2 places to buy these, and theirs are arriving later today.
For the GB, I can't reduce the price, but I can include free domestic shipping.
I'll get some better pictures in the morning.
-Mark
Attached thumbnail(s)
Posted by: Rleog Aug 16 2013, 04:38 AM
I'll take a set ( both doors). Thanks.
Posted by: Mblizzard Aug 16 2013, 04:53 AM
I will take a set.
Posted by: The Cabinetmaker Aug 16 2013, 05:00 AM
2 sets here Mark.
Posted by: Chris H. Aug 16 2013, 06:47 AM
So they are for all years? If they fit a '75 I'll take a set.
Posted by: lostreasure Aug 16 2013, 06:50 AM
put me down for two sets pm sent
Posted by: mharmon Aug 16 2013, 08:29 AM
Ill take 2 sets Mark
Mike
Posted by: Steve Snyder Aug 16 2013, 08:43 AM
Mark, I'll take a set. Thanks!
Posted by: nsyr Aug 16 2013, 08:53 AM
I'm in for a set.
Posted by: Mikey914 Aug 16 2013, 10:13 AM
From a PM-
Hey Mark,
Are these any different than they ones you have sold in the past?
Thanks,
Michael
These are a lower profile and will not "catch" like the ones we currently have (which are like the ones factory used to supersede these.
They are easier to install and were actually designed for this application.
I'll post pictures shortly.
-mark
Posted by: Mikey914 Aug 16 2013, 10:15 AM
QUOTE(Chris H. @ Aug 16 2013, 05:47 AM)
So they are for all years? If they fit a '75 I'll take a set.
These will fit all years as the tracks never changed the profile To be concurs correct, they never came from the factory with these on the late doors. At least that's my understanding.
I do like the way they look and work. They are on my 75.
-Mark
Posted by: MoveQik Aug 16 2013, 10:46 AM
I'll take a set! I will pay via paypal today. Are you shipping as they are ordered or at the end of the GB?
Thanks!
Posted by: FL 000 Aug 16 2013, 10:52 AM
I'm down for a set.
Posted by: Mikey914 Aug 16 2013, 10:54 AM
QUOTE(MoveQik @ Aug 16 2013, 09:46 AM)
I'll take a set! I will pay via paypal today. Are you shipping as they are ordered or at the end of the GB?
Thanks!
I will ship as ordered, the only thing to think about is I have a couple other group buys that are closing that you may want to add in and next week the funnel drain tube grommets and shock towers will be ready.
I'm also making a few things available to those that are participating in the group buys that others will not get.
Posted by: monkeyboy Aug 16 2013, 11:22 AM
I'll take a set.
Posted by: Jeffs9146 Aug 16 2013, 11:27 AM
I will take a set!
Posted by: X911IC Aug 16 2013, 11:55 AM
QUOTE(Mikey914 @ Aug 16 2013, 01:17 AM)
Stoddard has contracted with me to make these and I have their permission to make these available. They are the original design for the window scrapers that has been discontinued for decades. They were superseded with a 911 scraper.
Stoddard is adding some of my stuff to their site and I've been making 356 and 911 parts for them for some time now. They provided an original for me to produce these. I have to sell these at $8.50 each ($17 a set) as per our agreement, but there are only 2 places to buy these, and theirs are arriving later today.
For the GB, I can't reduce the price, but I can include free domestic shipping.
I'll get some better pictures in the morning.
-Mark
Mike, I'll take a set, Thanks Neil
Posted by: mepstein Aug 16 2013, 12:21 PM
Ill take a set.
Catch up with me when you have a minute. Thanks
Posted by: michael7810 Aug 16 2013, 12:42 PM
I'll take a set.
Thanks
Posted by: porbmw Aug 16 2013, 04:40 PM
2 sets please and thankis
Paul
Posted by: 914dave Aug 16 2013, 06:32 PM
I'll take a set.
Posted by: jsconst Aug 16 2013, 06:38 PM
Put me down for two sets, and two sets of the shock tower caps, one set of drain tube grommets.
Thanks
Jeff
Posted by: t collins Aug 16 2013, 07:08 PM
I'll take a set.
Thanks, Tom
Posted by: aharder Aug 16 2013, 07:29 PM
I'm in for a set
Posted by: Mikey914 Aug 16 2013, 08:38 PM
Pictures as promised.
1st I cut the angle in the front with a sharp knife and press in the first 10" or so.
Attached thumbnail(s)
Posted by: Mikey914 Aug 16 2013, 08:40 PM
QUOTE(Mikey914 @ Aug 16 2013, 07:38 PM)
Pictures as promised.
1st I cut the angle in the front with a sharp knife and press in the first 10" or so.
I have found the pulling reduces the thickness of the bulb so you can easily pop it in. Just make sure to push it in to take tension off of it so it will not shrink up.
Attached thumbnail(s)
Posted by: Mikey914 Aug 16 2013, 08:41 PM
I cut the length about 1/8"" longer than needed with a razor blade and soapy water sawing carefully down onto it.
Attached thumbnail(s)
Posted by: Mikey914 Aug 16 2013, 08:43 PM
I then pushed the rubber into the seal. Considering these were not made for the late door end caps They fit well.
Attached thumbnail(s)
Posted by: Mikey914 Aug 16 2013, 08:45 PM
Just make sure you have the front pushed all the way forward before cutting the back.
Attached thumbnail(s)
Posted by: bigkensteele Aug 16 2013, 09:14 PM
1 set please.
Posted by: zambezi Aug 16 2013, 09:37 PM
put me down for 1 set as well
Posted by: Harpo Aug 17 2013, 07:31 AM
I will take a set
Thanks
David
Posted by: kg6dxn Aug 17 2013, 08:03 AM
I need a set (both doors)
Thanks!
Posted by: 396 Aug 17 2013, 09:49 AM
I'll take a set. Thanks
Posted by: scraperhand Aug 17 2013, 09:05 PM
Ill take 2 sets thanks,mike
Posted by: Garland Aug 18 2013, 06:40 AM
1set please, thanks.
Posted by: motorvated Aug 18 2013, 07:53 AM
I'll also take a set.
Thanks, Mike
Posted by: Mikey914 Aug 19 2013, 09:55 PM
PMs sent to all so for. Let me know if I missed you.
Posted by: bob Aug 20 2013, 07:49 AM
missed me!
I'll take a set.
-bob
Posted by: barefoot Aug 20 2013, 01:03 PM
I'l take a set for both doors.
Barefoot
Posted by: 9146BRUCE Aug 20 2013, 02:07 PM
Hi I'l take a set.
Bruce
Posted by: montoya 73 2.0 Aug 20 2013, 05:10 PM
Me, me!!!!
Posted by: turk22 Aug 20 2013, 07:35 PM
Mark, I'd like a set as well.
thx, SteveT
Posted by: Mikey914 Aug 20 2013, 08:00 PM
PMs sent. These are shipping anyone else have installed pics?
Posted by: reharvey Aug 20 2013, 08:26 PM
I'll take one set.
Posted by: maxwelj Aug 21 2013, 08:09 AM
Hi Mark. I'd like a set . Thanks
Posted by: Mr.242 Aug 21 2013, 10:34 AM
I want a set.
Thanks!
Posted by: barefoot Aug 21 2013, 04:08 PM
QUOTE(Mikey914 @ Aug 16 2013, 04:17 AM)
Stoddard has contracted with me to make these and I have their permission to make these available. They are the original design for the window scrapers that has been discontinued for decades. They were superseded with a 911 scraper.
Stoddard is adding some of my stuff to their site and I've been making 356 and 911 parts for them for some time now. They provided an original for me to produce these. I have to sell these at $8.50 each ($17 a set) as per our agreement, but there are only 2 places to buy these, and theirs are arriving later today.
For the GB, I can't reduce the price, but I can include free domestic shipping.
I'll get some better pictures in the morning.
-Mark
Do these replace just the squeegee, or the other part in there also ?
Posted by: hotlanta914 Aug 21 2013, 05:00 PM
I will take a set as well - thank you.
Posted by: strawman Aug 21 2013, 06:44 PM
Send me a set for one car (driver and passenger doors). Thanks!
Posted by: Mblizzard Aug 22 2013, 06:21 AM
Got mine and started to install. These are much smaller in width than the ones on my car. Will post so pictures soon.
Posted by: Mikey914 Aug 22 2013, 02:10 PM
QUOTE(barefoot @ Aug 21 2013, 03:08 PM)
QUOTE(Mikey914 @ Aug 16 2013, 04:17 AM)
Stoddard has contracted with me to make these and I have their permission to make these available. They are the original design for the window scrapers that has been discontinued for decades. They were superseded with a 911 scraper.
Stoddard is adding some of my stuff to their site and I've been making 356 and 911 parts for them for some time now. They provided an original for me to produce these. I have to sell these at $8.50 each ($17 a set) as per our agreement, but there are only 2 places to buy these, and theirs are arriving later today.
For the GB, I can't reduce the price, but I can include free domestic shipping.
I'll get some better pictures in the morning.
-Mark
Do these replace just the squeegee, or the other part in there also ?
These are the original profile for the squeegee, so no additional parts required.
-Mark
Posted by: mikesmith Jan 1 2014, 09:47 PM
Just installed one of these, and I'm having trouble with the window 'inhaling' it as it goes down (which jams the window).
I'm sure I have something aligned wrong (or bent) ... what do I need to adjust so that the seal will 'squeegee' properly against the window? Should it be closer to, or further away from, the glass?
Also, to be sure that I have it in the right way around, the side with the longer profile and the little 'nub' strips on the underside looks like it should be against the glass - is that correct?
Posted by: McMark Jan 2 2014, 01:07 AM
Baby powder while the glass and seal are getting to know each other.
Posted by: MoveQik Jan 2 2014, 09:42 AM
QUOTE(McMark @ Jan 2 2014, 12:07 AM)
Baby powder while the glass and seal are getting to know each other.
I had the same problem after installing them a couple of months ago. I did just what Mark suggested. I added baby powder a couple of times over the course of a couple of weeks. Everything works perfect now.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)