Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Reverse sensor conection help
Posted by: gunny Aug 17 2013, 09:59 AM
Pulling the power train for first time. How do I unplug the reverse wire from the sensor?
Posted by: Spoke Aug 17 2013, 10:02 AM
There should be a rubber cover; just pull that off.
There are 2 single wire connectors that just press into the sensor. Pull these off by grabbing as close to the connector as possible. The wire tends to break off when pulled by the wire.
Posted by: gunny Aug 17 2013, 10:03 AM
QUOTE(Spoke @ Aug 17 2013, 08:02 AM) 
There should be a rubber cover; just pull that off.
There are 2 single wire connectors that just press into the sensor. Pull these off by grabbing as close to the connector as possible. The wire tends to break off when pulled by the wire.
Thanks
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)