Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ OT: Old Race Car

Posted by: marinmcgreevy Dec 12 2004, 11:26 PM

Hi All,

I was going though my hard drive and came across a mpeg of the car I put together and traded for the 914/6. This is a car that had been taken all apart nearly 40 years ago and the parts dispersed. The car had been last raced in 1973 with a fuel injected 2l BMW. The car in its original form, with its original engine, had not been together since 1965. The engine was sitting on a jack stand when I found it 20 years later. I am placing a link to the mpeg. Take a look. The video is of the second time I started the car. Below is a photo of the car taken last summer in my driveway. I started with a about 25 boxes and frame. It took me about a year to figure out how everything went together. I used the wear and dirt marks on the various parts to see how it all fit together. The collection of parts had been separated for 40 years.

Here is the link to the video. Make sure you turn up the volume!

http://f1.pg.briefcase.yahoo.com/bc/marinmcgreevy/lst?.dir=/CRP+Special&.src=bc&.view=

The car is now being properly restored and hopefully will be seen out on the vintage race circuit in the near future.

The car was called the California Racing Partnership Special. It was built up in the early 60s in Berkeley. The car was based on a Lotus 23 and was designed and built by Motor Racing Developments (Brabham). The car was evidently quite a handfull as it crashed during its first race in 1965 and was never raced again with the Olds V8. Below is a photo of the car after I put it together.

I hope you enjoy the video.

I am now restoring a Lola formula 5000 car. wacko.gif


Attached thumbnail(s)
Attached Image

Posted by: marinmcgreevy Dec 12 2004, 11:28 PM

One more of the car in 1965


Attached thumbnail(s)
Attached Image

Posted by: marinmcgreevy Dec 12 2004, 11:30 PM

When it ran with a BMW engine


Attached thumbnail(s)
Attached Image

Posted by: Aaron Cox Dec 12 2004, 11:35 PM

DEAD LINK unsure.gif

Posted by: marinmcgreevy Dec 12 2004, 11:45 PM

I don't know what happened. The files are there and available for anyone to see. Now I cannot access them. My bookmark still works to the file locations:

http://briefcase.yahoo.com/marinmcgreevy

Posted by: marinmcgreevy Dec 12 2004, 11:47 PM

Does anyone know a good place to upload mpegs to the web for all to see?

Posted by: skline Dec 12 2004, 11:52 PM

The link just worked for me. I am at a clients office though so I am not going to download it here. I will try it again when I get home.

Posted by: marinmcgreevy Dec 13 2004, 12:09 AM

Click on the link below and then click on the mpeg file "second start no text"

http://briefcase.yahoo.com/marinmcgreevy

Posted by: GWN7 Dec 13 2004, 12:22 AM

Towing it with a 68 Camero beerchug.gif

Posted by: Aaron Cox Dec 13 2004, 12:26 AM

works now! wow...fire out the pipes...lumpy cam smilie_pokal.gif aktion035.gif

Posted by: Lou W Dec 13 2004, 12:34 AM

COOL beerchug.gif beerchug.gif

Posted by: PatW Dec 13 2004, 12:37 AM

Thats got a mean howl. wacko.gif

Posted by: Rhodes71/914 Dec 13 2004, 01:25 AM

QUOTE(GWN7 @ Dec 12 2004, 10:22 PM)
Towing it with a 68 Camero beerchug.gif

I thought that was pretty cool to. That whole pic is classic.
Will have to check the vid out when I have a fast connection.

Posted by: Stutgart46 Dec 13 2004, 09:00 AM

I was looking over the pics of your interior in your 914/6 and I really like your gauge bracket. Did you make that or did you purchase it somewhere?

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)