I just recently replaced all of the hoses on the AC system and after replacing the wiring to the relay (above center console on interior evap) doesn't work. The bowlsby DPD diagram is different than mine (relay). Could some one provide a photo with captions on photo relating to where the wiring connections go from relay?
Thanks
I have a DPD in mine. While it works, I still find the wiring suspect. Can't trace it out tonight but I can snap some pictures quickly if that would help?
That would be great. Thanks.
Does this help???
DPD Manual:
zTN_Man10.pdf ( 695.59k )
Number of downloads: 46
Here is what I have but the wiring in my car should be considered suspect but it works.
Mike,
Yikes, they are all the same color. Can you identify where the wires are coming from? The far right wire (near side) with yellow terminal end I believe goes to the ON/Off switch to the unit. The center two wires go to the fuse panel. Can you identify which terminals (1-12)? The bottom far end goes ?? and the top twisted pair?? My wires are different colors so this makes it much tougher.
Thanks in advance
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)