Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Cold start valve

Posted by: BarberDave Dec 16 2004, 07:30 AM

Is there a way to test the fuction of the cold start valve? Ans. here or E-mail ,P.M. go to spam file ,????
don,t know why? Thanks Dave

Posted by: freezing14 Dec 16 2004, 07:43 AM

the easiest way to test is to take it out of the plenum and put 12 V on it,, it should click and if you have a source of compressair , connected to it ,, it will blow air,, be sure to check your cold start valve sensor mounted under the plenum, it is a temperature sensitive switch to ground, , you should have continuity if it is colder than -10C and no contact over 0C