Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Looking for a new CDI box

Posted by: '73-914kid Sep 27 2013, 05:20 PM

Well, I've used 3 of the old analog MSD 6A and 6AL boxes over the years, and never an issue.. I went a did a 6 conversion, and purchased a brand new 6A "digital" box, and sure enough, right around the 200 mile mark, it died. Smelled like burned wires, and the box was super hot. Had to hook the pertronix right up to the coil, switched power, etc. to make it home. This is not something I want to go through when I'm in making a long trip to visit the girlfriend.

So, what other boxes have people used with success? I've heard the hyfire is pretty popular? Any input?

Posted by: yeahmag Sep 27 2013, 06:57 PM

Mallory.

Posted by: tomeric914 Sep 27 2013, 07:09 PM

QUOTE('73-914kid @ Sep 27 2013, 07:20 PM) *

Well, I've used 3 of the old analog MSD 6A and 6AL boxes over the years, and never an issue.. I went a did a 6 conversion, and purchased a brand new 6A "digital" box, and sure enough, right around the 200 mile mark, it died.

I had one of the first Digital 6A boxes that would bump the tach on start-up just so you knew it was working. The later boxes had the option to turn that feature off, which is what I needed. About 9 months after purchase, I returned it for reprogramming and MSD took care of me. Send it back to MSD and they will repair or replace under warranty if you just got it.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)