Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Throttle Cable Entering Engine Bay

Posted by: wndsnd Oct 14 2013, 01:16 PM

From all the pictures I could find it looks like it enters under the battery tray. Does is come through the engine sheet metal or the shelf surrounds.

Anyone have a picture you can post ideally feeding dual webbers?

Thanks
John

Posted by: SLITS Oct 14 2013, 01:21 PM

Thru the engine tin, passenger side forward .... look for the hole in the tin.

Posted by: jimkelly Oct 14 2013, 01:21 PM

pic

Attached image(s)

Posted by: r_towle Oct 14 2013, 01:24 PM

QUOTE(SLITS @ Oct 14 2013, 03:21 PM)

Thru the engine tin, passenger side forward .... look for the hole in the tin.

Specifically the engine head tin on the passenger side, near the front of the motor,
On the horizontal section in front of the 2 inch heater hose hole.
should be a hold about 1/2 inch for the throttle cable, you may need to source a grommet.

rich

Posted by: wndsnd Oct 14 2013, 01:38 PM

Must be here?

Thanks Rich

Posted by: r_towle Oct 14 2013, 01:44 PM

X marks the spot....

Posted by: SLITS Oct 14 2013, 01:57 PM

QUOTE(r_towle @ Oct 14 2013, 12:44 PM)

X marks the spot....

Aarrrrrrgh, Matey

Posted by: wndsnd Oct 14 2013, 06:51 PM

Thanks guys,

I got it in and set it up with the carbs. So far so good.

John