Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ What oil to use

Posted by: ben*james Oct 19 2013, 01:59 PM

Any suggestions for the optimal oil to use, brand and weight. Oregon is a moderate climate most of the driving is done within the speed limit (not sport).

Attached Image

I refuse to upload a picture so you can actually see it headbang.gif

Posted by: pcar916 Oct 19 2013, 02:16 PM

If it has no leaks I'd run a high-zinc 20w-50 synthetic. Brad Penn is good. Otherwise a high-zinc dino oil.

Posted by: Luke M Oct 19 2013, 02:19 PM

Here I'll fix the pic for you.... happy11.gif

As for motor oil I would say 20w-50 of your favorite brand should be fine..


Attached image(s)
Attached Image

Posted by: ben*james Oct 19 2013, 02:24 PM

Thanks Ron. No leaks biggrin.gif

Damn you Luke. poke.gif

Posted by: sixnotfour Oct 19 2013, 02:37 PM

http://www.shell.com/rotella/products/tpl-pro.html

I had been using, Brad Penn would leak like crazy this not so much??
just my experience..wallmart has good deals on also..

Posted by: shoguneagle Oct 19 2013, 02:55 PM

I use Mobil 1, 10/40 Synthetic; keep the same oil as I use on the Vette only a different grade. Original specs????

I just moved to Oregon from Arizona and am interested in comments.

Steve

Posted by: SLITS Oct 19 2013, 03:21 PM

I use 20 - 50 Kendall GT with Liquid Titanium in my 2.7L. Has the appropriate ZDDP level.

Posted by: pcar916 Oct 19 2013, 03:51 PM

QUOTE(sixnotfour @ Oct 19 2013, 03:37 PM) *

I had been using, Brad Penn would leak like crazy this not so much??
just my experience..wallmart has good deals on also..


I ran Mobil-1 (100% synthetic) in both the '84 (3.2L) and the '95 (3.6L) and didn't have any problems with leakage. But no ZDDP content killed valve guides in both engines. Experiences vary to be sure, but if I got a truly dry engine I wouldn't hesitate to use it.

I have friends that run Rotella in everything they own. It' good oil, but Zinc is the answer to lots of wear problems, especially with valve guides. I won't run anything other than high-zinc in the older engines.

Posted by: ben*james Oct 19 2013, 03:52 PM

QUOTE(shoguneagle @ Oct 19 2013, 01:55 PM) *

I use Mobil 1, 10/40 Synthetic; keep the same oil as I use on the Vette only a different grade. Original specs????

I just moved to Oregon from Arizona and am interested in comments.

Steve


I thought we all agreed that grants pass was not part of the pacific NW? poke.gif
Much better climate in souther oregon, truth be told. Welcome to the great state of oregon anyway. driving.gif

Posted by: r_towle Oct 19 2013, 04:49 PM

Shell rotella in my 1984 911 with a 3.2 and it works great.

Nice part is it's available at most parts stores and truck stops.

Posted by: sixnotfour Oct 20 2013, 11:10 AM

QUOTE
I have friends that run Rotella in everything they own. It' good oil, but Zinc is the answer to lots of wear problems, especially with valve guides. I won't run anything other than high-zinc in the older engines.


The key is Triple= Rotella T

Posted by: r_towle Oct 20 2013, 04:04 PM

QUOTE(sixnotfour @ Oct 20 2013, 01:10 PM) *

QUOTE
I have friends that run Rotella in everything they own. It' good oil, but Zinc is the answer to lots of wear problems, especially with valve guides. I won't run anything other than high-zinc in the older engines.


The key is Triple= Rotella T

Yup, read the bottles

Posted by: ben*james Oct 20 2013, 09:43 PM

Seems like a lot of rotella t supporters. Good enough for me. Thank you all!

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)