I sure thought I saw the answer somewhere here, but I can't seem to run it down now. Will someone please chime in with the degrees of camber per mm of rear alignment shim?
I did see a post that mentioned with NO SHIMS you should get -2 degrees, is that the starting point?
Thanks
Google Trigonometry.
Hypotenuse = Length of the pivot shaft in the trailing arm. = 313mm
Opposite = Shim thickness = 2mm
Angle = inverse sin of opposite / hypotenuse = 0.366 per 2mm shim.
At least according to my assumptions and math.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)