A buddy gave me a set of sway bars. On the end of the front one it's marked "15".
Reasoable to assume it's a 15mm from this marking, yes?
My 914 is a v-8 converted 1973 with 225/50X16's on the front and 245/45X16's on the rear. Koni yellow in the rear with red coils. Not clear on the front....
Opinions using a free 15mm front sway bar?
Best all around street bar yet.
Do you have a set of calipers? You could always measure the bar...
--DD
you could also put an open end wrench over the bar till you find a size that is snug.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)