Printable Version of Topic

Posted by: jesiv Jan 4 2014, 04:29 PM

So I have the speedo out. However I can't figure out how to remove the inner seal! How do you get it out!

Regards,

james

Posted by: Cap'n Krusty Jan 4 2014, 04:33 PM

Seal in the speedo? There are seals in the drive, but I've never heard of one in the speedo itself................

The Cap'n

Posted by: jesiv Jan 4 2014, 04:35 PM

This seal not the o-ring

Posted by: Cap'n Krusty Jan 4 2014, 04:44 PM

Those look like the seals for the speedo drive unit, not the speedometer itself.

The Cap'n

Posted by: jesiv Jan 4 2014, 04:46 PM

Sorry for the bad title. How do you get it out?

Posted by: Cap'n Krusty Jan 4 2014, 04:57 PM

I pry it out with the corner of the tip of a smallish screwdriver. Just be careful not to gouge the surrounding metal. BTW, I always use Mc Marks modified housing.

The Cap'n

Posted by: jesiv Jan 4 2014, 07:18 PM

Thanks for the help! It turns out there was a metal washer above the seal that was stuck!! I got a small seal puller that popped the metal washer and seal out!!

I would have gotten McMarks fix but didn't have time. Poor planning on my part. I have a different thread on the transmission removal I will post my lessons learned.

Below is the tool, seal and metal washer

Regards

James