Hey folks.....Been poking around my 914 and will be replacing various parts over the weeks here.
For the distributor, which on mine is an old, pointless Allison model, I wanted to replace it with a Bosch and put in pertronics...then I found this "SVDA" thing on ebay...just wondering if its a good value, as it seems to be a brand new bosch, with the pertronics already installed. Good?
http://www.ebay.com/itm/321275352048?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
I use the mechanical advance Mallory (4554101).
Bosch 050 is very good with or without Pertronics I don't think that a 009 has enough advance for the Porsche version of the type4. There are probably some other newer ones that are made with more advance than the 009 but I don't know which ones are best.
Try CB performance black box:
http://www.cbperformance.com/ProductDetails.asp?ProductCode=2013
You may use any dizzy but it'll give you the qualities of a mechanical advance at the top end and svga advance at the low end. . .
So at idle, you can set your timing to 0 deg. Cooler engine in traffic.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)