I took off the console wires and labeled the wires and gauges on the end I took off before paint.
After I got my car back from the paint shop I found the other side of the cable disconnected and sitting in the floor of the car with a note on the tape that said plastic conn. by shifter.
The problem is the wires do not seem to match exactly.
Should it match like this?
Plastic connectors_____Console wire gauge end
Black Black/Red_____Black
xxxxxxxxxxxxxxx____Black/Blue
Brown______________(2) brown wires
Black/Blue (Defrost)___Brown (Defrost)
Red/White____________Red/White
Green/Black__________Green/Black
Gray________________xxxxxxxxx
Anyone got the correct way to match the wires?
here is club member who penciled it out
http://www.914world.com/bbs2/index.php?showtopic=71057&st=0&p=892848&#entry892848
Thanks Dangrouche! That is exactly what I need. The information available in this forum is amazing.
Kelvin
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)