A good deal on some 2.0L injectors.
I have purchased from this guy before
without any problems.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7945488028&category=33554
Good deal if you could get them for that price. Save almost a c-note I think.
Retails at about $80.00 each I think. I'm gonna bid (after I check the part #)unless someone here really needs them worse than I do. If so, let me know, and I'll back off.
ccininjectormode
Anyone ever found a replacement injector that will work...possibly something not bosch?
-L
Heeheehee....
I know a few people who don't care for them...
They won't screw you on ebay though.
QUOTE (CHAFF @ Jan 5 2005, 04:26 PM) |
Anyone ever found a replacement injector that will work...possibly something not bosch? -L |
QUOTE (Steve Thacker @ Jan 5 2005, 03:22 PM) | ||
yep sure did and they are running in my 2.0. They are made by a company name Sorenson. Identical to the 2.0 factory units and they are only $45.00 ea. Advance Auto Parts has them. |
Are these the injectors from advance auto parts that you are talking about?
http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&MfrCode=GPS&MfrPartNumber=8001061N&PartType=677&PTSet=A
QUOTE (StratPlayer @ Jan 5 2005, 06:31 PM) |
Are these the injectors from advance auto parts that you are talking about? http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&MfrCode=GPS&MfrPartNumber=8001061N&PartType=677&PTSet=A |
Purchased these remanufactured injectors for a 74 1.8. I liked the price after FLAPS quoted $110.00 each.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7938518468&rd=1&sspagename=STRK%3AMEWN%3AIT
CLININJECTME
Question - I have a 1.7 that was upgraded to a 1.9L - big bore kit - can I use these injectors?
Pros - Cons?
thanks,
Can you use them? Sure...will they get the best out of the engine? Depends on how sensitive your seat of the pants is....but only a dyno run will tell you that for sure.
I really need new injectors as well, I think. One of my 914's has a miss below 2800 rpm at feather throttle, worse when cold. I suspect a partially clogged injector??? Looking to have a spare set to send out to have cleaned and flow tested at RC engineering.
its looks like that set:
http://www.partsamerica.com/PartDetails.as...ype=677&PTSet=A
cross references to the 1.7L bosch PN:
OE #0280150009, 0280150009; Multi-Port Injection
the 2.0L one is:
PORSCHE 039 906 031
BOSCH 0 280 150 019 2.0L 1973 - 1974 Green plug
FOUND ON PARTSAMERICA
For vehicle: 1974 PORSCHE 914 H4 2.0 Liter FI (change)
5 parts found.
Description Availability * Price Buy
Niehoff Ignition 57513
Fuel Injector, New: Seal Kit Required; D-Jetronic; O.E. No. 039 906 031,039 906 031A
1 Year Limited Warranty Ships in 5 days
Weight: 2.8 lbs. $61.99
Niehoff Ignition 49196
Fuel Injector, Remanufactured: Seal Kit Required; D-Jetronic
1 Year Limited Warranty Ships in 5 days
Weight: 2.8 lbs. $54.99
$8.00 core
Borg Warner 57513
Fuel Injector, New: Seal Kit Required, D-Jetronic, OE No: 039 906 031, 039 906 031A
1 Year Limited Warranty Ships in 2 days
Weight: 2 lbs. $74.99
GP Sorensen 8001112N
; Multi-Port Injection
1 Year Replacement Warranty Ships in 1 day
Weight: 0.3 lbs. $55.99
GP Sorensen 8001061N
OE #0280150019; 914 Listing; Multi-Port Injection
1 Year Replacement Warranty
sometimes I wish I lived in the USA...it sure would be a lot easier to buy parts! Good prices on this site too!
-L
Thats the deal! Thanks for looking deeper. Some days I'm about as useful as lipstick on a pig.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)