Hey guys, So i tried to search the forum to see if anyone has done this or not.
https://www.google.com/search?q=4x130+to+4x100+adapters&oq=4x130+to+&aqs=chrome.1.69i57j0l5.6285j0j4&sourceid=chrome&espv=210&es_sm=122&ie=UTF-8#q=4x130+to+4x100+adapters&tbm=shop&spd=9338435751798212956
i found this just by searching 4x130 to 4x100 adapter. I just like the 4x100 wheels better, plus i have some BBS mesh wheels with a 1.5 inch lip in storage.
Give me some advice, I'm just looking at all the accessories to purchase at once.
Thanks
Remember that these will add quite a lot of increase to the track measurement, so if the wheels you want to use have a stock backspace, you might have trouble fitting them under the stock fenders.
Most 4x100 wheels are front wheel drive application so a 1 inch adapter should work out in youre favor ,measure before purchase,
your results may vary...
awesome advice guys...things i never thought of. ill do some measurements and then consider purchasing them....thank alot guys.
You must also consider the centering mechanism. Hub- or lug-centric? How will your mods affect this? On a 914 suspension, it's REALLY important.
The Cap'n
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)