Where do I measure the front sway bar to determine it's size. On the round shaft or the square end. Mine is 15mm on the shaft and 17mm on the square ends.
The round part. You have a 15mm bar.
What size is/was stock for a 914? 15mm or 17mm?
15 mm as I remember. 17 was 911. I have a 19 mm off a 911 also.
15mm front, 16mm rear.
--DD
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)