I couldn't shift into 1st or Reverse, for some reason the clutch just would disengage. Well it was somewhat warm and not raining (for once) so the motor came out.
and found the problem
pressure plate is bent and the throw out bearing is bad
It turns out that it was pretty dirty so I cleaned it up
time for beer I will hit it again tomorrow I am hoping to get this all back together before Friday because I am leaving for a business trip
Put it on jack stands...
There must be many more things you want to do while the motor is out....
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)