Dan, we need the follow up to the FOUR to SIX engine tin conversion.
I have a donor rear stock FOUR tin piece.
Tell us how to modify it and include pics if you can.
this weekend could prove interesting...
Thanks Dan!!
( you've saved me hundreds of dollars thus far )
KT
trekkor, sent you a couple PMs.
I think a full size template would be cool. If anyone has a sketch I'll CAD that bad boy up and post the file link here.
I can even take several faxes and make one large template out of it.
Cheers
Okay can someone measure the one of the side pices for me? I need the width of the straight edge (forward end) that connects to the front tin. IIRC it is around 4" and has 2 holes in it.
Thanks
Kerry,
I've got 3 5/8 on my tin. I can trace a fax a copy if you like.
Joe
Thanks.
What I am trying to do is to take a good photo of both rear pieces and scale it up to 1:1 I have a photo with other pieces in it. If I can scale it so the known pieces are 1:1 then everything should work.
I am very close and will finish it tonight. If anyone has the real thing I would love to bounce some measurments off ya for you to compare
If I cna get it close I should be able to make a template. I can plot the full size template out at work and drop some into the mail to whom ever?
Cheers and I'll keep you guys posted
I had really planned on posting better pic's for you guys today, but got called into work. I won't get home until later, but will try to take some pics and measurements for you. More to come...
More of the heat! I need heat!
Template Anyone
I can send some six conversion tin piece templates when I get back to CAMP.
CCLINSIXTIN
I have templates for the rear two pieces made out of plywood for the factory tin. I would be happy to copy a few off for some folks in paper or cardboard or something.
Check here to see how I modified the rear 914-4 tin instead. Much easier. Check the last couple of pages:
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=15282&st=0
QUOTE (boxstr @ Feb 3 2005, 09:26 AM) |
I can send some six conversion tin piece templates when I get back to CAMP. CCLINSIXTIN |
I thought Dan was selling his tin in the resource area, I guess it's cheaper to do yourself but I would probably rather get Dan to make me up a set..which is what I was going to do. (I have enough projects on this car already).
Doug C
QUOTE (DougC @ Feb 3 2005, 11:20 AM) |
I thought Dan was selling his tin in the resource area, I guess it's cheaper to do yourself but I would probably rather get Dan to make me up a set..which is what I was going to do. (I have enough projects on this car already). Doug C |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)