found some nice chrome ones and thought they would look good in the 914, but i dont know if they or attach the same as the stock and vw ones.
Are there any options besides the OE black plastic window cranks
Thanks
David
I had been wondering if anyone had tried to fit those chrome ones.
The three on the bottom are the same as the 914 uses. So I assume the others will fit too. I could go by there on Tuesday and check, but I think Eric would know
Karmann Ghia Window Cranks & Buffers http://www.bughaus.com/karmann46.htm [From ZTE mobile browser]
Ok, I took another look at that. The others are from the 50's so, like the cap said, no. Just the bottom three.
I know this may be blasphemy to some, but I know for a fact that '66 Mustang window cranks will fit. May need a longer screw. https://www.mustangsunlimited.com/itemdy00.asp?T1=MS4103+01
I found this link and ordered a pair of reproductions from SMC. Some modifications required.
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=99545
edit: hopefully this link works better
Hmmm, link goes to forum home page.
Sorry, second time is the charm. works now!
One thing I did was take the plastic covers off my cranks. The metal, once painted, looks really cool IMO.
Zach
I need some cranks for my 64C. Interested in selling? White or black knob?
I picked up a set of 'chromies' (with holes in them) with varnished wooden escutcheons and knobs at a local VW FLAPS called IPC ... http://www.ipconlinestore.com
They were reasonably inexpensive. IIRC, they also had the same ones with black knobs.
Pretty much any cranks that fit the same era VW (bug, bus, etc.) will fit a 914.
EDIT: Yep, they must have black ones … just noticed the Ghia I recently picked up has a pair too … http://www.ipconlinestore.com/empi-custom-window-cranks-pr.html
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)