Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ syncing Weber carbs

Posted by: offwatch Apr 19 2014, 05:40 PM

Trying to sync the carbs, on the left side both throats have the same flow at idle but on the right side carb the front throat is higher then the back. How do I adjust so both front and back have the same air flow?

Posted by: Dtjaden Apr 19 2014, 06:32 PM

The air bleed screw. It's the one with the lock nut next to the idle mixture screw (I'm assuming IDF carbs).

Posted by: offwatch Apr 19 2014, 06:55 PM

Yes IDF, Thanks.

Posted by: Elliot Cannon Apr 19 2014, 10:15 PM

Good information here. http://www.redlineweber.com/

Posted by: Kirmizi Apr 20 2014, 01:41 PM

And here-
http://www.914world.com/bbs2/index.php?showtopic=45696&hl=air+bypass+screw