Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Sail panel vinyl
Posted by: wes Apr 23 2014, 05:25 PM
I have sail panel vinyl from AA (they say from Germany) and wile I don't believe it is the same as on my parts car it is very close. I also have another thats not at all right disregard, now I have found another that is from Germany as well but very spend$$y. Looking for thoughts on the looks of the AA sail panel vinyl and acceptance.
I should add wile I am doing a restoration on my car I hope it to be a very nice driver, Im not concerned with a concourse show car!
Posted by: JawjaPorsche Apr 23 2014, 06:43 PM
I got my sail panel vinyl from 914Rubber.com. It is not OEM but it is very nice and I like it. I am sure the material you got from AA will do just fine.
Here is a tutorial I did when I replaced mine:
http://76.162.11.251/tuck/sailvinyl.htm
Posted by: boxsterfan Apr 24 2014, 08:16 AM
You only need these 13 characters: 914rubber.com
Posted by: Dave_Darling Apr 24 2014, 09:31 AM
I should add wile I am doing a restoration on my car I hope it to be a very nice driver, Im not concerned with a concourse show car!
If it's a driver, use whatever makes you happy. Or even omit the vinyl, if you like!
--DD
Posted by: Bob L. Apr 24 2014, 09:48 AM
You only need these 13 characters: 914rubber.com
"914rubber" is only 1 character. His name is Mark.
Posted by: '73-914kid Apr 24 2014, 11:04 AM
Mikey sells some awesome stuff, and I have no experience with his targa bar vinyl, although I have Camp914's vinyl on my car and am really pleased with the texture and quality. Just another vendor to throw into the mix.
Posted by: boxsterfan Apr 24 2014, 11:52 AM
In another thread here, it was discussed to even try utilizing some vinyl that looked like the brushed aluminum from the 911 targas.
Photoshopped (I think) pic in this thread: http://www.914world.com/bbs2/index.php?showtopic=228694
When I restore my 914, I am considering either the "brushed aluminum" vinyl or none. Just something to think about...
Posted by: malcolm2 Apr 24 2014, 12:46 PM
In another thread here, it was discussed to even try utilizing some vinyl that looked like the brushed aluminum from the 911 targas.
Photoshopped (I think) pic in this thread: http://www.914world.com/bbs2/index.php?showtopic=228694
When I restore my 914, I am considering either the "brushed aluminum" vinyl or none. Just something to think about...
Mine looks like that now. Originally a silver car, I pulled the vinyl to check for rust. I should get me a magic marker and add the stripes and "TARGA".
Posted by: boxsterfan Apr 24 2014, 04:19 PM
Got some more pics of your brushed aluminum vinyl install? Looks good from here.
Posted by: rangrbob Apr 24 2014, 06:32 PM
You only need these 13 characters: 914rubber.com
"914rubber" is only 1 character. His name is Mark.
Any of you know if Mark is still around? He has not returned emails or phone calls. I have been trying to get a status of a set of sail panel vinyl and front trunk liner kit that was on back order from my last purchase. Normally it wouldn't be a big deal, but they are paid for.
Posted by: Mikey914 Apr 24 2014, 06:36 PM
Hey Bob I'm here. Email or PM typically work. If you drop me your email I can look up your order and provide tracking. These are in stock and should have shipped.
I have been tied up at the day job more lately so you may have missed me on the phone.
-Mark
Posted by: rangrbob Apr 24 2014, 06:39 PM
Hey Bob I'm here. Email or PM typically work. If you drop me your email I can look up your order and provide tracking. These are in stock and should have shipped.
I have been tied up at the day job more lately so you may have missed me on the phone.
-Mark
Will do. I tought you vanished.
Posted by: Mikey914 Apr 24 2014, 06:40 PM
I did find part of the problem. My PM box is full and the mass empty function will not work. I had to go back and manually take out a few, but email will work best.
-Mark
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)