75 2.0
This is a repost of sorts.
Turn signal / hazard relay buzzes with power on (key in on position). Red brake warning light is solid.
If I use the turn signals, the unit "clicks" as you would expect. The turn signal indicator blinks in time, as does the red brake warning light.
If I turn the hazard lights on, all works as expected. The red brake light also blinks.
The red brake idiot light is the "B" light near the temp gauge.
I don't know if the "B" light should blink when the turn signals are used. I think not, so the fact that they do and the fact that the buzzing and solid red light seems to indicate something, but I don't know what or where to begin to start to troubleshoot.
I don't have another relay to try, the one I have is new, so I'm leaning to something else that is causing that red light to stay on and the buzzing.
Thanks,
Len
Emergency brake handle is up and not contacting properly when down.
Seat belt warning system is old and decayed...
Found the issue - big never mind.
While at the shop, they flushed out the brake system.
There is a "reset" button on the M/C that you need to (DUH) reset whenever you muck with the brakes.
I reset the M/C switch and all is well.
Sometimes you feel like a jerk - other times you just are!
Anyway, maybe this will be helpful to someone else down the 914 track.
Len
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)