Posted by: vw505 May 14 2014, 09:01 PM
I have a hole in my line that runs in the tunnel. I know it's got the bubble ends on it and I'm guessing it's metric but does any one know the length it's supposed to be?
Posted by: Mblizzard May 14 2014, 09:31 PM
Email Eric Shea at PMB. There is not much that guy doesn't know about brakes!
www.pmbperformance.com
sales@pmbperformance.com
Posted by: bdstone914 May 14 2014, 10:37 PM
QUOTE(vw505 @ May 14 2014, 08:01 PM)
I have a hole in my line that runs in the. I know it's got the bubble ends on it and I'm guessing it's metric but does any one know the length it's supposed to be?
I think the year makes a difference. 75 and 76 are a little different.
They are metric bubble flares. Eric sell replacement lines. If you decide to make your own a bubble flare kit can be bought for about $20.
Posted by: PlantMan May 14 2014, 11:10 PM
QUOTE(vw505 @ May 14 2014, 08:01 PM)
I have a hole in my line that runs in the. I know it's got the bubble ends on it and I'm guessing it's metric but does any one know the length it's supposed to be?
Get a hold of Eric at PMB Performance. He will have the information you need, he may even reply to your post as well.
Take care!
Posted by: Mike Bellis May 15 2014, 06:59 AM
All I know is the thread is 10mm.
Posted by: vw505 May 15 2014, 08:43 AM
Looking at PMB it looks like the DAPO just grabed one from the parts store that was to short and thats why the shifter rubbed a hole in it.