75 2.0 FI
There are three wires that attach to the fresh air controls - in the front dashboard.
Looks like white / green , white / yellow, and white / ?? (looks like just white wire).
There are three spades they plug on (call the one towards the back of the car #1, #2 in the middle, and #3 towards the very front of the car.
Which wire goes to which connection????
If you look at this ebay auction (for the switch) you'll see the three connections I am talking about.
http://www.ebay.com/itm/Porsche-914-Dash-Climate-Vent-Controls-1971-OEM-Original-/131182622972?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e8b17f8fc&vxp=mtr
Thanks,
Len
White/yellow trace - White/Green trace - White
As you numbered them in your post,
1 = White/yellow, towards rear of the car
2 = White/ Green, middle
3 = White, towards front
Haynes manual and current flow diagram says: C - white/yellow (medium speed) in the middle. B - White/green rear(slow speed) to the rear. D - White (fast speed) to the front.
Tom
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)