Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Whats this part for?
Posted by: falcor75 Jun 21 2014, 09:42 AM
I remember that I took it off my chassis for some reason I just cant remember where it was.... 
http://matsgarage.com/?attachment_id=357
Posted by: Mark Henry Jun 21 2014, 10:30 AM
No clue, looks homemade.
Posted by: GeorgeRud Jun 21 2014, 10:36 AM
Could it have been used as a shim for the rear trailing arm?
Posted by: falcor75 Jun 21 2014, 10:44 AM
The holes are from two spotwelds I drilled out, its not very big, about 40x10 mm's.
I just cant for the life of me remember where it was on the body.
Posted by: rmital Jun 21 2014, 10:49 AM
The holes are from two spotwelds I drilled out, its not very big, about 40x10 mm's.
I just cant for the life of me remember where it was on the body.
mm's.....
.....oh, Sweden 
Posted by: bandjoey Jun 21 2014, 10:59 AM
Slotted brace for the engine lid??
Posted by: reharvey Jun 21 2014, 11:06 AM
Looks like the center brace for the rear bumper rubber.
Posted by: HarveyH Jun 21 2014, 11:12 AM
Appears to be similar to something a DAPO put on mine to hold the engine lid hinge support bracket into position.
Attached image(s)
Posted by: McMark Jun 21 2014, 11:33 AM
Looks like the center brace for the rear bumper rubber.
Yup. Can't imagine why you'd take it off.
Posted by: falcor75 Jun 21 2014, 11:49 AM
ah, now i remember....
It fouled my rotiserie cross beam.... 
I'll weld it back once the car is back on jackstands again. 
Posted by: bandjoey Jun 21 2014, 01:31 PM
Bingo! Rear center bumper support.
Posted by: reharvey Jun 21 2014, 01:41 PM
Looks like the center brace for the rear bumper rubber.
Posted by: 76-914 Jun 22 2014, 07:35 AM
Looks like the center brace for the rear bumper rubber.
Yup. Can't imagine why you'd take it off.
I damned near blew mine off with a hand grenade the 5th time I wounded myself on it. I finally taped some insulation around it.
Posted by: Olympic 1.7 Jun 22 2014, 09:14 AM
I damned near blew mine off with a hand grenade the 5th time I wounded myself on it. I finally taped some insulation around it.
Funny thing, I just taped mine up after hooking myself on it a bunch of times going around the back of the car.
Posted by: falcor75 Jul 31 2014, 03:03 AM
Anyone with the rear bumper off their car that can measure how far it sticks out from the body?
Posted by: jacksun Jul 31 2014, 05:32 AM
hopefully this is what you are requesting. 
Posted by: falcor75 Jul 31 2014, 05:58 AM
Thank you.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)