Posted by: larryg Jun 26 2014, 02:39 PM
Everything in the instrument panel cluster works except the odometer which stopped turning a few years back. Suggestions on how to diagnose, or info on likely causes will be much appreciated.
Posted by: orthobiz Jun 26 2014, 03:16 PM
http://www.pelicanparts.com/techarticles/Mult_gauge_repair/mult_gauge_repair.htm
Paul
Posted by: larryg Jun 26 2014, 05:13 PM
QUOTE(orthobiz @ Jun 26 2014, 02:16 PM)
http://www.pelicanparts.com/techarticles/Mult_gauge_repair/mult_gauge_repair.htm
Paul
Thanks Paul
Posted by: worn Jun 26 2014, 08:43 PM
QUOTE(orthobiz @ Jun 26 2014, 01:16 PM)
http://www.pelicanparts.com/techarticles/Mult_gauge_repair/mult_gauge_repair.htm
Paul
Done two, two worked. I used a punch to peen the flange and a bit of epoxy for luck. First one I did quite a while ago and still holding up.
Posted by: stugray Jun 27 2014, 07:18 AM
QUOTE
except the odometer which stopped turning a few years back
This is a common problem with these cars.
You have to take it down off the jackstands :-)