Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ more welding fun

Posted by: scott thacher Jan 19 2005, 10:54 PM

okay got the engine bar for the suby almost done, it measures 1 inch square wall thickness .083. with 16 gauge gussets. right now i can lean on the ends and it flexes about 1/2 inch ( 190 lbs ) i will be welding a 90 degree angle on two side after i fit it to the car and engine.
not bad for gas welding

Attached image(s)

Posted by: scott thacher Jan 19 2005, 10:55 PM

gusset detail shot

Attached image(s)

Posted by: RS22b Jan 19 2005, 11:20 PM

nice!

Interested in seeing what you have when you're done.

-billy

Posted by: McMark Jan 20 2005, 11:41 AM

Looks good. Can't wait to see it in the car. IPB Image Yay, gas welding. MIG has its place, but I prefer gas for most everything.

Posted by: mattillac Jan 20 2005, 01:44 PM

excellent progress scott. i'm very anxious to see the end result. keep up the good
work.

Posted by: Chris H. Jan 20 2005, 11:00 PM

IPB Image

Nice work Scott. Once you get your engine mount setup perfected let us know if you want to make a few more of them!

Posted by: scott thacher Jan 21 2005, 05:00 PM

well just stuck the engine bar under car looks like its perfect, you can see where the motor mounts are ( circled in white ) i just need to shorten the tops, right know they are about 8 to 10 inches too long.

tonight i will build the part that bolts to the motor mounts on the engine

a couple of pics

Attached image(s)

Posted by: scott thacher Jan 21 2005, 05:02 PM

now for a close pic of motor mount to bar, remember it needes to come up a few inches, also notice how most if it tucks behind the head. it will not be in the way of exhaust or shifter, as well as it clears the trailing arm

Attached image(s)

Posted by: scott thacher Jan 21 2005, 05:04 PM

and last one showing here the body mount will go and where the top of the bar is before i shorten it

Attached image(s)

Posted by: scott thacher Jan 21 2005, 07:29 PM

here is a pics of the bar that will be welded to the engine bar and bolted to the stock engine mount on the motor

its made from 2, 1/8 thick 1 inch angles welded together, with a solid peice welded across the two where the bolt goes

Attached image(s)