Not sure the part number, and mine is a little different in that I made it more sturdy and the hole nice and tight. It can be reamed out, but is stretchy enough that it will tightly seal 2 wires. I know the OEM has a thinner membrane, I beefed it up.
If anyone knows the part number let me know, but I needed these and had been asked to make them in the past, so it you need one let me know. I'll have the run complete in about a week.
I also suspect that there is application in the front for fog lights, but have not had a chance to check.
Attached thumbnail(s)
I'm in for a couple sets
Mark, the part number is 111.971.911 A. The parts book makes reference to it 5 times. 2 at the rear license plate light openings, 1 at the rear bulkhead for the accelerator cable, 2 for the radio (?), and 1 for the CD cable.
I've had 2 NOS grommets put away for years and fished them out tonight and found my old notes were with them noting that the additional grommets were needed.
The parts book doesn't make reference to the front fogs, but I suspect that they could be used there too.
Put me down for 5.
Thanks for the number.
Mark
On that interesting note from sbsix, can you put me down for 10
That should bump the order up a bit.....
Damn
If it makes you feel better I can slow down.
No... not really.
I have another good one coming up that these will be a nice little add in.
Did you read my PM about Westy mud flaps ?
Looks like it has some 911 application and is available new. With 111 it would also be used in VW Beetles.
http://forums.pelicanparts.com/5577665-post4.html
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)