Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Installation is reverse of

Posted by: Elliot Cannon Jul 8 2014, 01:01 PM

OK. Sure. Easy, right? av-943.gif


Attached image(s)
Attached Image

Posted by: speed metal army Jul 8 2014, 02:08 PM

Ugh!
I have nightmares about stuff like that... blink.gif

Posted by: Mike Bellis Jul 8 2014, 02:13 PM

2 speaker wires and 3 other wires coming from the dash =spaghetti, Ala Eliott

Posted by: 76-914 Jul 8 2014, 02:14 PM

poke.gif Well if you'd sober up a little it would probably go much faster. biggrin.gif When I pulled my gages for the change up I still had the blue tape marking each lead. I decided to leave them on. Comes in handy with "old" memories. dry.gif

Posted by: SLITS Jul 8 2014, 04:00 PM

RTFWD

Posted by: Elliot Cannon Jul 8 2014, 04:30 PM

QUOTE(Mike Bellis @ Jul 8 2014, 01:13 PM) *

2 speaker wires and 3 other wires coming from the dash =spaghetti, Ala Eliott

Totally wrong. Oil temp., oil pres., Volts, CHT, clock, fuel pump, interior light, driving light and cig. lighter. biggrin.gif

Posted by: Elliot Cannon Jul 8 2014, 04:31 PM

QUOTE(76-914 @ Jul 8 2014, 01:14 PM) *

poke.gif Well if you'd sober up a little it would probably go much faster. biggrin.gif When I pulled my gages for the change up I still had the blue tape marking each lead. I decided to leave them on. Comes in handy with "old" memories. dry.gif

I thought about re-wiring the whole thind buuuut NO. laugh.gif

Posted by: patssle Jul 8 2014, 05:19 PM

$20 buys a printer label maker at Office Depot. Wiring up for my /6 at the moment - it's worth the purchase!

Posted by: Elliot Cannon Jul 8 2014, 07:35 PM

QUOTE(patssle @ Jul 8 2014, 04:19 PM) *

$20 buys a printer label maker at Office Depot. Wiring up for my /6 at the moment - it's worth the purchase!

I actually have one and the masking tape will be replaced with something more permanent for the NEXT time I decide to do this. biggrin.gif

Posted by: balljoint Jul 8 2014, 09:40 PM

You don't do this kind of thing with your airplane do you?

unsure.gif

Posted by: SLITS Jul 8 2014, 10:02 PM

QUOTE(Elliot Cannon @ Jul 8 2014, 03:30 PM) *

QUOTE(Mike Bellis @ Jul 8 2014, 01:13 PM) *

2 speaker wires and 3 other wires coming from the dash =spaghetti, Ala Eliott

Totally wrong. Oil temp., oil pres., Volts, CHT, clock, fuel pump, interior light, driving light and cig. lighter. biggrin.gif


"And a Partridge in a Pear Tree"

No cigar or cup holder?

Posted by: r_towle Jul 8 2014, 10:05 PM

QUOTE(SLITS @ Jul 9 2014, 12:02 AM) *

QUOTE(Elliot Cannon @ Jul 8 2014, 03:30 PM) *

QUOTE(Mike Bellis @ Jul 8 2014, 01:13 PM) *

2 speaker wires and 3 other wires coming from the dash =spaghetti, Ala Eliott

Totally wrong. Oil temp., oil pres., Volts, CHT, clock, fuel pump, interior light, driving light and cig. lighter. biggrin.gif


"And a Partridge in a Pear Tree"

No cigar or cup holder?

Isn't that your job?

Posted by: Elliot Cannon Jul 11 2014, 10:49 PM

Finally got the "can of worms" back together. I'm turning into a DAPO and I haven't even sold the car. I wanted to clean up all the wires in back but, "screw it", everything works OK and I wanted to drive the car again. Not the best picture but here it is.


Attached image(s)
Attached Image

Posted by: bulitt Jul 12 2014, 01:42 AM

Thinking quick connectors are the way to go.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)