Just dropped a 2.0 out of a 76 914 and the exhaust is different, the HE's do not attach directly to the heads, but are attached to a double j-tube type setup that attaches to the heads. Plus this thing has a really funky exhaust, it looks like the typical 4 tip monza, but is not solid accross the muffler area, each bank has it's own muffler with a balance tube between the muffs. It is heavy as hell to. Seems I remember reading about the 76 exhuast system being different?? I'll post pics later if nescessary.
I've never heard about different stock exhausts in '76
when I got you correct, it sounds like an aftermarket exhaust from ANSA
but hard to tell, without pics
the '75/'76 cars have a totally different design exhaust system than the '74 and older cars.
the muffler sounds like it's an aftermarket unit, probebly good for making noise and not doing anything benifical
I've had monza's before, they make the fart can ricers jealous, but that's about it! Thanks Mueller, I thought I had heard that , but could not remember. This motor has me guessing, the heads are 3 bolt, but the case ID number is not where I expect it! I'm going to take a better look today!
does it look like this one?
Attached image(s)
75-76 2.0s were designed to make use of a catalytic converter. The exhaust flanges were triangular and used three bolts to hold on the muffler.
The 75 1,8 was also differrent...
That's it! Is that exhaust any good or just like a monza?
QUOTE (1bad914 @ Jan 21 2005, 04:47 PM) |
That's it! Is that exhaust any good or just like a monza? |
UI have one, and it is in good shape, kind of cool!
now that's funny ... look what I've found while surving throug http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7949423765&category=33636
Hey, I just got one of those! Granted it's got surface rust and the tips aren't as shiny...
I always had the opinion that ANSA made good exhaust in general, but they aren't producing for 914 anymore. Anything that looks like an ANSA is a Monza or knock-off and is cheap crap.
There's something about an Italian name on my German windsucker that just drives me insane.
3 bolt is 2.0...all '76 were 2.0...
and the monza/anza what ever four tip mufflers don't do anything for a stock FI engine, except make noise. They don't put enough back pressure on the flow and lose low end torque.
Enjoy...
QUOTE (McMark @ Jan 22 2005, 01:51 AM) |
I always had the opinion that ANSA made good exhaust in general, but they aren't producing for 914 anymore. |
QUOTE (Mike D. @ Jan 22 2005, 12:39 AM) |
3 bolt is 2.0...all '76 were 2.0... and the monza/anza what ever four tip mufflers don't do anything for a stock FI engine, except make noise. They don't put enough back pressure on the flow and lose low end torque. Enjoy... |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)