The metal shroud covering the engine thermostat is missing as is the one on the opposite lower side of the engine. I have a box of various metal shroud pieces but can't seem to find any that fit. Does anyone have pictures of the undersides of the engine that would help me out?
I can help you out. I have that area exposed and the shroud on the table. I'll post some pictures within the hour.
Cheers
Nate
I just took a few pictures of the tin. This is on a 73 2.0 914 with a stock exhaust.
1. Driver side picture shows piece of shroud that I think you are looking for. It fits here.
2. Passenger side picture shows everything installed.
I hope these help you out! I can post more pics if you need them.
Cheers,
Nate
PS: two posts for two pictures, OK
Attached image(s)
passenger side picture
Cheers
Nate
Attached image(s)
We usually don't paint those oil return tubes as a rule. The oil returning to the sump gets cooled alot from them.
They sure look pretty thou.
Geoff
Wow what is it with these tin pieces lately? This has got to be the 4th or 5th post in the last couple of days. Here is a diagram for further ref.
Attached image(s)
QUOTE (Rhodes71/914 @ Jan 23 2005, 09:57 AM) |
Wow what is it with these tin pieces lately? This has got to be the 4th or 5th post in the last couple of days. Here is a diagram for further ref. |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)