Hi boys and girls-just talked to Neal at Getty. I called to have a few ?s answered about CF front and rear hoods for my 914. Neal was great and took care of the ?s. I asked him about prices, $699 for each. I mentioned the 914Club. A group deal would be in order if I could get five (5) people who would be interested in a group purchase.
I told Neal I would make a post to the Club.
Here's the deal--Each piece would be $200 off if I could get 5 total to purchase. You would not have to buy both front and back, just one piece.
He also said that shipping would be a flat $100 for both, anywhere.
So, lets review, front and back lids plus shipping $1100. Sounds like a deal to me.
I wish I had the money for it. My back lid really needs a replacement or painting...
Just gave Neal a call, gone for the day. From the sounds of things I would say yes to a full hood being included. Sounds like GD would like to create some business.
Shipping cost is for anywhere in the US or really anywhere ? I'm in Canada. I've got a poor rear lid.
I might be interested
Deleted my post about not having to buy both pieces after I re-read starting post.
If a full hood is available, I'm in for that.
The other stupid question is: 5 pieces total for the group deal, or 5 of each type, f/r?
He said anywhere, but will have to confirm. I have a call into him, should know tomorrow.
Do you mean "Full hood" w/o head light notches? That's what I'd like.
What is the finish? Black weave?
No just five (5) pieces total for group deal. You don't have to buy both F/R, it's your choice. $200 savings on each piece no mater how many you buy, as long as your have five people to start.
I will find out tomorrow if a full hood would be included, my guess, yes. Yes, black basket weave.
Can these lids be run bare or do you need to send them to a painter for a clear coat?
Anyone have a pic of a silver 914 with bare carbon fiber lids hanging around?
Will have to clear coat.
Can more hoods than 2 be combined for shipping? So lets say I want 1 rear lid, Felix wants front and rear and Anothony wants both as well...can all 5 be put together and we split the $100 shipping charge???
Since we are local to each other, I could hand deliver the lids to the other 2 guys.....
I will ask Neal tomorrow. More than two pieces shipped to one location for the $100, correct?
QUOTE (Mueller @ Jan 24 2005, 04:23 PM) |
can all 5 be put together and we split the $100 shipping charge??? |
QUOTE (mack914 @ Jan 24 2005, 05:26 PM) |
I will ask Neal tomorrow. More than two pieces shipped to one location for the $100, correct? |
Always a better deal when you pick them up.
QUOTE (SirAndy @ Jan 24 2005, 05:28 PM) | ||
or, we have one of the local guys pic them up "for free" and trailer them to the WCC where we then just put them on our cars right there! gawd, you guys are sooooo cheap ... Andy |
I called Neal at the Riverside Ca. address. So, you guys in Caly might just want to drive out there and pick up your group purchased.
Yea, Just think how much better your car will look with the blinging glare coming off those Carbon fibers.
Grrr... Why do you guys have to do this to me? I hate you. I really do.
I want a hood for sure, and would love the rear.... I hate you.
QUOTE (mack914 @ Jan 24 2005, 05:35 PM) |
I called Neal at the Riverside Ca. address. So, you guys in Caly might just want to drive out there and pick up your group purchased. |
QUOTE (michel richard @ Jan 24 2005, 07:56 PM) |
Shipping cost is for anywhere in the US or really anywhere ? I'm in Canada. I've got a poor rear lid. |
im 20 min from riverside
At that price, I'm in for one rear & one front without cutouts for the lights.
Can we get some detailed pictures?
I got a pair for GT Racing that could be better.
If these are good enough to go without paint, I would get front and back.
QUOTE (914RS @ Jan 24 2005, 06:42 PM) |
Can we get some detailed pictures? I got a pair for GT Racing that could be better. If these are good enough to go without paint, I would get front and back. |
SOMEONE HIRE ME!!!
I'd love a set for bluecar
Now for a noob question, what's the difference between a FRP (regular glass) hood and CF? Worth $200 more list price? I'm guessing that the construction is identical, just the material and laminate schedule change...
I'm thinking about swapping out my repaired steel front hood, I wouldn't mind glass here 'cause it's surrounded by steel.
Eric
QUOTE |
maybe I could "make" some money by picking them up for the Nor-Cal guys |
I live in riverside. I could pick them up from the person making these, save all you SOCAL guys some shipping charges and you can drive to my house to pick them up. That a good idea?
Besides, I want to see how pretty these will look in person, since I'll never be able to afford one
1. What is the estimated weight savings if one was to convert both front and rear from steel to CF?
2. How best to sell this to my wife?
QUOTE |
1. What is the estimated weight savings if one was to convert both front and rear from steel to CF? |
QUOTE |
2. How best to sell this to my wife? |
If only it was a more affordable option... I'd be ripping off panels and hoods and going the bolt-on or pop-rivet method of attachment.
QUOTE (Mueller @ Jan 24 2005, 06:44 PM) | ||
so are you not happy with yours? |
there's room on my credit card
someone push me over the edge....
Mack, could you check with Getty for me if they can ship to europe (the Netherlands) and if so, how much?
QUOTE |
increased safety , car will have less weight and be more nimble to avoid obsticles in the road.....also, you are lowering the CG which makes the car less likely to tip over, with the car weighing less, you don't need to spend as much money on go-fast parts for the engine, oh yea and better gas mileage good luck !!!!! |
Can't right now. But if I ever do, they'll get the paint.
Just me.
KT
QUOTE (914RS @ Jan 24 2005, 07:29 PM) |
Pictures would be very good. If they're really nice, I'll get a pair. |
I'm back with some answers.
1. Shipping to Canada more.
2. Shipping of more than 2 pieces cost more. No more than two pieces go into a shipping box.
3. Getty doesn't make a full lid. (with no light cut-outs)
Buyer does have a choice of thickness (weight) Depending on use. Lighter if you are using car for racer, heavier for street use.
Neal is getting back to me about posting some pics of lids.
Hope this helps -
CF lids are stocked in Riverside, CA for those of you who were thinking about picking them up.
Next is to find out what the minimum thickness will be to have it still seal properly, but be as thin as possible...
What kinda weight savings are we looking at anyways?
I have a place near me that sells all the stuff I need to make one, I think I may give it a shot and see how it comes out. I just think that $700 is too much for a lid even with a $200 discount. A lid shouldnt cost more than maybe 2 or 300 tops.
You will determine thickness when placing your order for lids with Neal. He is better equiped to determine your needs as far as application.
Man, if only this discount applied to the 911 style dashes
Maybe my last post was too vague...
How much does a steel front hood weigh?
How much does a FRP front hood weigh?
How much does a CF front hood weigh?
We can each determine for ourselves the weight savings to cost benefit ratio. I would be painting any hood that goes on my car...
Eric
Is the price irrespective of thickness?
Good ? Does price drop with drop in thickness?
Will ask Getty.
QUOTE (mack914 @ Jan 25 2005, 09:49 AM) |
3. Getty doesn't make a full lid. (with no light cut-outs) |
My Getty glass hood & rear trunk, street version weigh about 16# each. The stock hood was 32# & rear 30#.
Hmmm...
Depends on how soon the buy happens. I could be in for both.
Michael
QUOTE |
someone push me over the edge.... |
QUOTE |
QUOTE (mack914 @ Jan 25 2005, 09:49 AM) 3. Getty doesn't make a full lid. (with no light cut-outs) I'm out. |
I will talk to Neal at Getty tomorrow about placing orders. It will go down something like this-If you are interested-you put a call into Neal place your order, stating that you are part of the deal with the 914Club, then arrange for shipping or pickup. I will let you know in a post tomorrow about a phone # to get to Neal, with ?s and order instructions. If you have any addition ?s tonight please post and I will add to the conversation with him tomorrow.
Can you convince him to make a hood without headlight cut-outs. It looks like he lost 2 sales right off the bat. I know I'd be up for one, too, but I'm a broke-ass mofo right now.
Mark,
you may want to clarify if the frame is molded like the original. Some CF or fg is flat or has flat composite reinforcement. Racers want the least amount of material/weight and will pin them to the car not bolt to hinges. That's why pics of both sides of each lid would be helpful.
I'll see what i can do....
I may be in. Will he discount other items that he sells if I go in on the deal? I need some pieces for my Carrera RS.
T.C.
I talked to Neal today and he will also do other products in the catalog if the group buy happens. So I'm definately in. Come on guys, step up to the plate.
T.C.
I'll get a pair, but I must see some detailed pictures first.
QUOTE (carr914 @ Jan 26 2005, 12:58 PM) |
I talked to Neal today and he will also do other products in the catalog if the group buy happens. So I'm definately in. Come on guys, step up to the plate. T.C. |
Pictures please.
Also, I need a little bit to move some funds around and make it work. I am sure there are some other people that need a little time too....
You will have plenty of time. Mark at Getty said that it may take 3 to 4 weeks to fill all the orders. (based on the interest we have) They can only reproduce 3 0r 4 hoods a week. They won't bill your credit card until the items are shipped, so you would have (maybe) an addition month to come up with the funds.
Bad ass. I want to send like half in cash/check/mo and do the rest of credit, I'm sure he won't have a problem with that?
Well I'm officially interested.. Can you get me a price of a 911 style 914 dash in CF after the discount?
Some of you said that you want pictures before you commit, just talked to Neal at Getty, here's what he will do; you go to the GettyDesign website, send him an e-mail, mention the Club, and he will send you pictures of the 914 lids.
He discribed to me that the lids are just like stock on the bottom, with the ribs, or skeleton structure as Neal called it. You will not notice a difference in the physical looks of the street Vs. the race lid, it will just weight less.
Neal said that to get things going we need five people to commit. So, I will start a new topic where you will only post if you want to order and please include your name. I will let this ride until Friday and than I will call him that afternoon with the names. (That was his idea)
One more thing, Some of you are interested in other CF parts. I would suggest that you call Neal and talk to him about your needs. Sounds like he's willing to give you a discount on what ever you are interested in, as long as we have 5 guys buying lids. Good Luck. Neal's # 1-951-686-4386 Riverside, Ca.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)