Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 901 Gear Identification "R" 4th?

Posted by: Amenson Sep 1 2014, 06:55 AM

I picked up a couple transmissions to gather parts for a new tranny for the PorSTI. Both boxes were ex amateur racing boxes with a somewhat bizarre mix of ratios. One of them seems to be somewhat unique.

Attached Image

From what I can find from some initial research the R 4th was put in a few different transmissions with a Nurburgring ratio option. What I need to figure out is if this is some uber rare original gear or an after-market reproduction.

Attached Image

I would like to get some idea of a fair sale price for it so that I can offset some of the trans rebuild costs. Any help would be greatly appreciated.

Cheers,
Scott

Posted by: brant Sep 1 2014, 08:18 AM

Count the teeth
The stamping aren't a good way to identify

Posted by: Amenson Sep 1 2014, 08:27 AM

QUOTE(brant @ Sep 1 2014, 06:18 AM) *

Count the teeth
The stamping aren't a good way to identify


Should have put that....25/27. When I first counted I assumed that it was a flipped V. Then I saw the stamping and thought about it a bit until I resized that V can not be flipped to 4th screwy.gif


Posted by: crresind Sep 1 2014, 08:37 AM

That is an original gear. The tip-off is the date stamp, 2.68. These are very rare gears. I have not priced these in several years, but they were going for in excess of $700.

Posted by: 396 Sep 1 2014, 10:15 AM

To my knowledge factory gears do not have holes drilled into them. The only company that I know that did that was Power House in Az years back. I would consider that an after market gear.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)