I own 2 914-6 (authentic) cars. 1 is slightly modified with some upgrades to make it more usable and perform a bit better.
My other car (Big Red) is a highly modified 1970 914-6 (in GT form). I have always wanted to pull off the upgrades and put the original engine back in, etc. This car currently is running a 911 3.6 twin plug from a 964. Below is a list of some upgrades.
• Porsche 964 engine
• 50mm PMO Webers
• Electromotive twin-plug crank fire ignition
• Aase RSR valve springs, titanium retainers
• Web Euro-spec camshafts
• Patrick Motorsports Jet-hot coated racing headers and sport muffler
• 901 side-shift gear box with 904 main shaft and short gears
• MOMO competizione shift knob
• Automation billet aluminum intermediate plate
• 225mm Patrick Motorsports lightweight clutch
• Patrick Motorsport RSR aluminum flywheel
• Quaiffe LSD and billet side-plates
• Automotion solid transmission mounts
• B&B 930 front mounted engine oil cooler with thermostat
• 911SC front suspension with aluminum cross brace
• Porsche (Big Red) Twin Turbo front and rear brakes
• Pagid racing brake pads
• 23mm Gun-drilled front torsion bars
• 930 tie rods
• Charley front sway bar
• Porsche Factory rear sway bar
• Porsche RSR threaded front Bilstein struts and sport valve shocks
• Eibach rear coil over springs
• Automotion adjustable monoball upper strut mounts
• Poly-graphite suspension bushings
• 19mm Master cylinder
• Kinesis 17 X 8 and 17 X 9 ½ three piece racing wheels (polished)
• Fresh Goodyear Eagle F1 tires
• 914-6GT chassis stiffening kit
• 914-6GT boxed rear suspension
• Porsche Factory GT precision butt-welded steel flares
• Composite front and rear deck lids
• Factory GT composite racing seats
• MOMO prototipo steering wheel
• SPA fire system
• Porsche Factory fuel tank with Patrick Motorsports fuel – safe cell
• Martin Baker vintage exterior fuel cap
• New factory interior
• Bell seat belts
• Rennline Pedal box
• Adjustable brake bias with hydraulic e brake
• Racing mirrors
Pretty insane build back in the day. According to the PO, the build had over $125,000 in costs and upgrades. I've never priced them out, but I will say there is a lot of great work. The car is rock solid in itself.
Rebuilding the original 2.0 would cost some money, as would removing and replacing many other parts to bring it back close to original.
If the 3.6 engine and all of the performance parts were taken off, is there a market for it. I am just trying to gauge the market to see if my restoration cost could be offset with the sale of the parts. I simply do not know that space well.
Any guesses?
My other avenue might be a very reputable restoration shop who would do the makeover in exchange for all of the parts. Could be a deal for someone. But I win too as my 914-6 is more valuable in original build.
Thanks.
What are looking at for the 3.6? I had to at least ask
That's a big can-o-worms ...
From past experience, i'd say *if* you're lucky (big IF here) you might be able to get $0.30/$1.00 for each of the good parts you have.
That is for the desirable things like the suspension/brakes or the tranny with the LSD.
Other stuff will be pennies on the dollar.
If you're thinking about making money by bringing it back to original, you might have to wait a while until prices get even higher than they are today.
Unless you have a big parts stash, you will need a lot to take it back to orig. There's really a lot of big and small things particular to a real 6. There is a very good thread on this site devoted to the differences. Will you remove flares and all the stiff kits? I agree with Andy, doesn't sound like a money maker but if you have your heart set on it, it's your car do do what you please.
Almost like you should sell it as is and buy a stock one...
Give up
I agree with Mike, sell the sizzle to some hotshot and buy an more easily redeemable car.
Is that Callicot's old car? If so, that car was an amazing build. I would agree with the others that you would be better off selling it for top dollar and finding a more original six to start with. FWIW.
Pictures of big red?
Can you post some pictures?
I think there's comparable value to a 3.6 conversion and an uptick being a real /6 chassis. Makes no sense to undo that working value to chase some dollars because that rabbit hole will cost you and still won't be original unless you have the case and a darn good body guy.
Personally, a highly modded /6 is worth more to me than a real /6 because of the drive alone.
with everyone else. Sell it as-is....buy another 6.
Another thought...
There MAY be someone willing to trade you heads-up.
...food for thought anyway.
Another thought from me
Instead of taking Parts off & selling them for pennies on the Dollar, get a solid 914-4 that you can make a conversion out with those parts. Then sell that, I think you would recover a higher % of your money back
On the other hand it is a noble ambition to return a rare car such as that to stock condition. To show that my heart is in the right place, I would give you 2 grand for all that old junk you have to take off in order to restore it properly. That should get you started finding the right stuff.
There are plenty of pictures of the car here on the site.
It used to belong to the late Dan Callicott (aka as http://www.914world.com/bbs2/index.php?showuser=3136)
I think it would be a shame to change the car that Dan created, the fact that it is a 6 only makes it that more special, many 6" s were chopped and made into race cars, Dan's creatation is a master piece that needs to be appreciated for what it is.
I think it would be smarter to rebuild the original engine (if you still have it), transmission. Then acquire a front and rear quarter panels and OEM front suspension and package them with the car, so a future owner would have the right materials to make it stock again.
The modifications to my -6 are modest enough that I understand why people suggest reverting them. For something as comprehensive, and more importantly as well done as this car, I don't think it makes any sense.
This seems like the kind of well-executed evolution of a car that winds up years later being known as "the Callicott 914-6" when it shows up at a concours or similar venue. It shows what an ideal and comprehensive upgrade would look and feel like, and how it would have been done, at a particular point in time. There's a need to preserve that kind of thing as well, and that isn't invalidated just because the car started as a -6 rather than a -4.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)