Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ EBrake pivot yoke

Posted by: jim_hoyland Sep 19 2014, 07:08 AM

What is the best way to get enough slack at the eBrake pivot yoke so that the cable and pin can be reinstalled ?

It was hard to remove I didn't loosen the eBrake cables at the firewall nor the caliper

Attached image(s)

Posted by: bdstone914 Sep 19 2014, 07:50 AM

You can attach the cable to the handle before you bolt it to the long. You may be able to pull to handle enough to get it back on the stud. Otherwise you will have to loosen the cables at the firewall then readjust after installing the handle.

Posted by: jim_hoyland Sep 19 2014, 07:53 AM

[quote name='bdstone914' date='Sep 19 2014, 06:50 AM' post='2087999']
You can attach the cable to the handle before you bolt it to the long. You may be able to pull to handle enough to get it back on the stud. Otherwise you will have to loosen the cables at the firewall then readjust after installing the handle.
[/

That worked ! Thanks. I have the new lever mounted and just need to take up some slack at the firewall