Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Interest in a D-Jet 2-Pin, 3-Pin, 4-Pin, Rubber Boot?
Posted by: A&PGirl Sep 23 2014, 11:41 AM
http://www.914world.com/bbs2/index.php?s=&showtopic=242948&view=findpost&p=2089166
Using the old Bosch numbers, I went found the superseded numbers for the D-Jet 2pin rubber boot and the D-Jet 3/4pin rubber boot.
After much looking, I believe I found an adequate source to get the superseded D-Jet 2pin rubber boot. The new boot does not have the ears and has a much sleeker appearance. See the picture for the difference between the old and the superseded boot.
Apparently, the 3-pin and 4-pin are available from a source I found. They are sleek like the 2pin boot.
Would anyone be interested in to getting new Bosch D-Jet 2pin, 3pin & 4pin rubber boots for their fuel injection? Perhaps as a group buy? 
Posted by: Tom Sep 23 2014, 01:15 PM
Swedish Treasures has the correct ones, same as older Volvo's.
Tom
Posted by: A&PGirl Sep 23 2014, 05:16 PM
Golly, you say D-Jet boots are widely available.
Why is no one talking about being able to buy D-Jet boots? AA is not widely available. Many people simply do not want to do business with AA.
It's fine if you want to buy a lot stuff you don't need or want from that place you referenced. According to their online catalog, they only sell D-Jet rubber boots in sets for Volvo's for $$$. If you don't want new Bosch production boots, that 's fine. Go where ever you want.
As indicated in the OP, I've found a source just for brand new Bosch D-Jet 2pin boots. You can buy how many you need or want.
Posted by: A&PGirl Sep 24 2014, 05:31 PM
Getting things done, I did some intense looking around. Apparently, the 3-pin and 4-pin rubber boots are available from a source I found. They are sleek like the 2pin boot and have no ears.
The D-Jet 2pin rubber boots is used on the fuel injectors and cold start valves. D-Jet 3pin rubber boots are used on injector trigger points. D-Jet 4pin rubber boots are used on the sensors such as the pressure & throttle position.
Would anyone interested in group buy on Bosch D-Jet boots?
Posted by: bdstone914 Sep 25 2014, 04:19 PM
Getting things done, I did some intense looking around. Apparently, the 3-pin and 4-pin rubber boots are available from a source I found. They are sleek like the 2pin boot and have no ears.
The D-Jet 2pin rubber boots is used on the fuel injectors and cold start valves. D-Jet 3pin rubber boots are used on injector trigger points. D-Jet 4pin rubber boots are used on the sensors such as the pressure & throttle position.
Would anyone interested in group buy on Bosch D-Jet boots?
What kind of pricing can you offer?
I have used Volvo fuel injector boots which are about $4 at the dealer. They say Volvo on them which might bother some people.
Posted by: hndyhrr Sep 25 2014, 04:33 PM
got some from 914 rubber
Posted by: A&PGirl Sep 25 2014, 07:23 PM
What kind of pricing can you offer?
I have used Volvo fuel injector boots which are about $4 at the dealer. They say Volvo on them which might bother some people.
Wow, that sounds like a really great buy! How do you hide them so no one can see the Volvo label? I know Volvo's are suppose to be great safe cars, but they're not 914's. I'm just saying.
Posted by: A&PGirl Sep 25 2014, 07:32 PM
got some from 914 rubber
Wow, I checked 914 rubber and didn't see any 3pin, 4pin, or 5pin boots. Maybe I must have been dreaming when I saw in the Porsche PET that 914's use 2pin, 3pin, 4pin and 5pins boots.
Posted by: bdstone914 Sep 25 2014, 07:51 PM
What kind of pricing can you offer?
I have used Volvo fuel injector boots which are about $4 at the dealer. They say Volvo on them which might bother some people.
Wow, that sounds like a really great buy! How do you hide them so no one can see the Volvo label? I know Volvo's are suppose to be great safe cars, but they're not 914's. I'm just saying.
I wasn't worried about anyone sticking their head in so far as to see the Volvo name on the bottom of the boot.
Looks like 914 rubber only has the 2 pin boots at four for $18.
Posted by: Mikey914 Sep 26 2014, 12:57 AM
I am looking for samples of the larger boots as I can easily make these, just need good samples.
Posted by: A&PGirl Sep 26 2014, 12:30 PM
Mikey, you are behaving like a troll.
I did not ask you to make the boots. I found a supplier who has genuine Bosch boots for the 2, 3, 4 & 5pin. If I wanted, I could have them in my hands Oct. 6.
This is my interest thread for a possible group buy, run be me, not you.
I don't appreciate your hijack.
Posted by: hndyhrr Sep 26 2014, 01:42 PM
My bad, Mikey did not hi-jack your posting, I opened that door. so i apologize.
Posted by: A&PGirl Sep 26 2014, 02:06 PM
My bad, Mikey did not hi-jack your posting, I opened that door. so i apologize.
I really appreciate you owning up and apologizing. Please don't open the door next time. No hard feelings.
Posted by: AvalonFal Sep 26 2014, 03:50 PM
Good to see free enterprise and competition are alive and well.
Posted by: scotty b Sep 26 2014, 09:18 PM
Mikey, you are behaving like a troll.
I did not ask you to make the boots. I found a supplier who has genuine Bosch boots for the 2, 3, 4 & 5pin. If I wanted, I could have them in my hands Oct. 6.
This is my interest thread for a possible group buy, run be me, not you.
I don't appreciate your hijack.
You seem to like to throw about that term " troll" Carrie. Anyone who disagrees with you is a " troll " anyone who points out your posts are less than accurate is a " troll " Anyone who points out your " perfect fit " product is NOT perfect fit is a " troll " It has been pointed out MANY times in the past by MANY members here you're sales pitch and attitude are your biggest competition. Will you at some point will you take note ?
BTW, You ARE a vendor and it is requested that vendors post in the VENDORS thread. Maybe you haven't payed enough attention to other posts to see that so i'll try and help you out with a link
http://www.914world.com/bbs2/index.php?act=SF&s=&f=4
Posted by: Mike Bellis Sep 26 2014, 10:32 PM
Troll...
Posted by: scotty b Sep 27 2014, 04:53 AM
Troll...
Attached image(s)
Posted by: Drums66 Sep 27 2014, 01:16 PM
......Picture above, is a 2 pole 1.8, L-jet boot.
Posted by: A&PGirl Sep 27 2014, 02:33 PM
Mikey, you are behaving like a troll.
I did not ask you to make the boots. I found a supplier who has genuine Bosch boots for the 2, 3, 4 & 5pin. If I wanted, I could have them in my hands Oct. 6.
This is my interest thread for a possible group buy, run be me, not you.
I don't appreciate your hijack.
You seem to like to throw about that term " troll" Carrie. Anyone who disagrees with you is a " troll " anyone who points out your posts are less than accurate is a " troll " Anyone who points out your " perfect fit " product is NOT perfect fit is a " troll " It has been pointed out MANY times in the past by MANY members here you're sales pitch and attitude are your biggest competition. Will you at some point will you take note ?
BTW, You ARE a vendor and it is requested that vendors post in the VENDORS thread. Maybe you haven't payed enough attention to other posts to see that so i'll try and help you out with a link
http://www.914world.com/bbs2/index.php?act=SF&s=&f=4
Que?
Dude, what is with the flaming? You have been crusading against me for the pass 2 years with flame trolling and flame wars.
So, how's the weather?
Posted by: A&PGirl Sep 27 2014, 02:39 PM
Troll...
OMG you're right. I wish I were more like you because you're like the best 914Worlder.
Posted by: A&PGirl Sep 27 2014, 02:40 PM
......Picture above, is a 2 pole 1.8, L-jet boot.
Would you like a copy of the Bosch Tech page on the D-Jet stuff?
Drop me a pm
Posted by: mepstein Sep 27 2014, 04:57 PM
Scatty - back off, this thread is just starting to get amusing. Let it ride. 
Posted by: The Cabinetmaker Sep 27 2014, 05:12 PM
I have never seen an ljet injector boot so I don't know what they look like, but I've never seen one of those pictured on a djet.
Posted by: scotty b Sep 27 2014, 05:59 PM
Scatty - back off, this thread is just starting to get amusing. Let it ride.
Posted by: A&PGirl Oct 1 2014, 09:10 AM
Genuine Bosch D-Jet replacement boots for the original 2-pin boots. 
Posted by: Captain Obvious Oct 1 2014, 10:17 AM
IDEA 
...if we could tap into the TINY pirate market we could get these for PRACTICALLY NOTHING on a group buy! They'd LOVE these!
You're Welcome 
!
Posted by: A&PGirl Oct 1 2014, 12:00 PM
IDEA
...if we could tap into the TINY pirate market we could get these for PRACTICALLY NOTHING on a group buy! They'd LOVE these! You're Welcome
!¿Qué? Posible alerta cuenta falsa. ¿Quién paga por la piratería? Entonces, ¿cómo está el clima?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)