Printable Version of Topic

Posted by: 914Sixer Oct 19 2014, 04:33 PM

Is anybody using these wheels? 996.362.112.00 Says the ET 50. Spacers needed?


Attached image(s)

Posted by: mgp4591 Oct 19 2014, 05:57 PM

I think Brant is running these on his car from what I saw at RRC.

Posted by: jim_hoyland Oct 19 2014, 08:16 PM

Linda Horn's car has them and they look great. Phil Hahn (sp) has a set of chromed ones. both have been featured on World

Posted by: brant Oct 19 2014, 08:21 PM

I'm running the 7 version. But pulled fenders. No spacers

Posted by: jim912928 Oct 19 2014, 09:19 PM

I'm running them...16x6 all 4 corners with no spacers and no fender pulling.

Posted by: 914Sixer Oct 19 2014, 09:26 PM

All right, that is what I wanted to hear. Re-finished wheels are available online for $125-135. Any side view pictures of wheels on cars?

Posted by: mmascari Oct 20 2014, 12:23 AM

I also just purchased a set of those wheels. Here is a pic of a car with them (not mine).

Posted by: Chris914n6 Oct 20 2014, 12:39 AM

I've got 7s on the back with stock Box size tires 225/50. Front 6s 205/55. Pulled fenders and a FLAPS 5/16 spacer or it rubs the inside. Same spacers on the front to fill the hole.
Before I got the rear pulled I fit the 7s on front and 6s rear.

Posted by: wndsrfr Oct 20 2014, 08:35 AM

Here's "Buttercup" with 'em.....put the 6's on rear and 7's on front with 205/50 Star Spec tires....



Attached image(s)

Posted by: 76-914 Oct 20 2014, 08:42 AM

Any weight info??

Posted by: mskala Oct 20 2014, 10:10 AM

I used to have 4 of the 7x16. Those weighed about 18.5 pounds.

Posted by: 914Sixer Oct 21 2014, 06:10 PM

What size tires are you running with theses wheels?

Posted by: jim912928 Oct 22 2014, 03:51 AM

Typo'd up above...I have 16x7's on all 4 corners. I run 205/55 michelins.

Posted by: 914Sixer Oct 22 2014, 01:56 PM

All of a sudden all the refinished wheels have disappeared on Ebay. Now the hunt will be on to find at 4th wheel at the same price. I picked up 3 refinished wheels for $375 shipped. They will be here Monday.

Posted by: SA-914 Oct 22 2014, 08:02 PM

Those wheels look fantastic! You gave up on the other take offs you got?

Posted by: 914Sixer Oct 22 2014, 08:37 PM

Yes the set of Mahles I had are scrap metal. 4 out of the 5 were warped. Going with the 5 bolt.

Posted by: McMark Oct 22 2014, 09:56 PM

I got 'em too.


Attached image(s)