i didnt do crap all day but this after noon was great. We went our PCA chili/dessert party and Erin won first place for chili. I talked to a bunch of guys about some up coming events since im the safety tech for autox and DE out here. Ended up picking up my spindles, shocks and 19mm master cyl from another pca'er and heading out tomorrow to get my new 911 rotors and steel front calipers...
O and by the way, if anyone wants, i can get a set of 911 aluminum front calipers from the same guy for $200each-dual piston w/ dual bleeders loaded..$200each. Let me know ill just charge ya shipping. I also have some slotted front rotors for a 911 if anyone wants to make an offer, very little use- like new basically from what i can tell.
heres the rotors. They are slightly wider than the factory 78sc rotors that i have. They have some wear but still very good.
Attached image(s)
rear
Attached image(s)
side
on the left is my stock 78sc rotor, and on the right is the slightly wider slotted rotor. There are no markings indicating brand or size.
Attached image(s)
here is the thickness of the rotor. The center which sticks out for the hub to attach to is the same thickness as the stock sc rotors and the 944 rotors i have.
Attached image(s)
those are the 24mm Carrera rotors.
good deal for someone, but they won't fit my S calipers, so i'll hafta pass ...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)