Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ GB - Clutch cable end the cable goes through, 2 correct size nuts, pulley, pulley bushing, and cable cover bellows.
Posted by: Mikey914 Oct 21 2014, 11:22 PM
So, I have made the end that the cable goes through as that's been running about $13 as I lost one of mine and had to replace it, so thought these were quite overpriced.
I decided to include 2 nuts as these are hard to find and using one with nylon will eventually give out over time. This happened to me at WCR 2012, and was a pain to deal with on the drive as a few of you may remember. If you tighten the 2 against each other you can get them to stay.
Also made the pulley and the NLA bushing as these tend to both wear over time. I made the replacement out of delrin and it is sturdier than the OEM eliminating any flex of the pulley.
The cable bellows is new also
Option for the cable is $18 if you want to add it. I'm bringing in cables, and will have them in a few days, the other parts are made and on the shelf
Really a great deal fro many hard to find and overpriced parts.
Bump the thread and I'll put you down for a set. let me know if you want a cable.
I will have 2 other GB's opening up soon and and you will be able to combine, one is for some interior parts that haven't been available in many years, the other is something we all can use, and is in the same area.
So, who's interested ?
Attached thumbnail(s)
Attached image(s)
Posted by: Mblizzard Oct 22 2014, 04:36 AM
Even if yours is in good shape this is something to have on the shelf just in case.
I an in!
Posted by: mepstein Oct 22 2014, 05:17 AM
Yes
Posted by: SA-914 Oct 22 2014, 05:42 AM
I'm in with cable.
Posted by: BeatNavy Oct 22 2014, 05:59 AM
This is good timing for me. I am in for probably two, sir.
Posted by: cn2800 Oct 22 2014, 06:23 AM
I'm in for two sets of everything, including cable.
Posted by: rmital Oct 22 2014, 06:30 AM
I'm in for one set including cable. 
Posted by: no1uno Oct 22 2014, 06:48 AM
I'm in for 1 set
Posted by: Tbrown4x4 Oct 22 2014, 06:52 AM
I'm in. One set with cable. Thanks
Posted by: jim_hoyland Oct 22 2014, 07:10 AM
Great ! This is a smok'en deal...put me in.
Attached thumbnail(s)
Posted by: Highland Oct 22 2014, 07:11 AM
I'm in.
Posted by: pilothyer Oct 22 2014, 07:20 AM
I'm in for 2 (no cables)
Posted by: sb914 Oct 22 2014, 07:24 AM
I'm in as well, with cable
Posted by: michael7810 Oct 22 2014, 08:04 AM
I'm in with a cable
Posted by: craig downs Oct 22 2014, 08:15 AM
I would like one including the cable
Posted by: andrew15 Oct 22 2014, 08:27 AM
In for 2 sets
Posted by: rmdinmd Oct 22 2014, 08:40 AM
am in for one.
Posted by: '73-914kid Oct 22 2014, 08:41 AM
2 sets without a cable please
Posted by: 02loftsmoor Oct 22 2014, 09:18 AM
So, I have made the end that the cable goes through as that's been running about $13 as I lost one of mine and had to replace it, so thought these were quite overpriced.
I decided to include 2 nuts as these are hard to find and using one with nylon will eventually give out over time. This happened to me at WCR 2012, and was a pain to deal with on the drive as a few of you may remember. If you tighten the 2 against each other you can get them to stay.
Also made the pulley and the NLA bushing as these tend to both wear over time. I made the replacement out of delrin and it is sturdier than the OEM eliminating any flex of the pulley.
The cable bellows is new also
Option for the cable is $18 if you want to add it. I'm bringing in cables, and will have them in a few days, the other parts are made and on the shelf
Really a great deal fro many hard to find and overpriced parts
Bump the thread and I'll put you down for a set. let me know if you want a cable.
I will have 2 other GB's opening up soon and and you will be able to combine, one is for some interior parts that haven't been available in many years, the other is something we all can use, and is in the same area.
So, who's interested ?
put me down for the small parts,,, NO cable please
Wes
Posted by: barebrad Oct 22 2014, 09:36 AM
+2 for me. Cables with both.
Posted by: maf914 Oct 22 2014, 09:37 AM
Definite requirement for the spares kit. Years ago I had a cable break at a stop sign, luckily close to home, and lost the hardware at the cable pulley. My sister came in her minivan and gave me a tow (using a tow strap) to my house about a mile away. I returned to the intersection and found the clevis and cable end with locknut in the road, chewed up slightly from traffic. I had a spare cable so I was able to make the repair quickly. Without the clevis and locknut it would have been days.
Mark, I'll take two hardware kits and one cable. Thanks as always.
Posted by: sbsix Oct 22 2014, 09:38 AM
Mark, part numbers for 914-4 and 914-6 clutch cables are different. Will your cable be universal? If so, I'm in for the kit.
Posted by: Markl Oct 22 2014, 10:31 AM
I'm in for one plus cable.
Posted by: Kansas 914 Oct 22 2014, 10:51 AM
2 complete sets for me please - cheers!
Posted by: patssle Oct 22 2014, 11:08 AM
1 set with cable. Thanks!
Posted by: 914nola Oct 22 2014, 12:24 PM
One for me with cable
Posted by: black73 Oct 22 2014, 06:35 PM
One without cable for me, please.
Posted by: Rleog Oct 22 2014, 09:22 PM
Set with cable please
Posted by: eric9144 Oct 22 2014, 10:09 PM
In with a cable 
Posted by: Mikey914 Oct 22 2014, 11:49 PM
Mark, part numbers for 914-4 and 914-6 clutch cables are different. Will your cable be universal? If so, I'm in for the kit.
These are the 4 cables.
Posted by: SixerJ Oct 23 2014, 12:10 AM
I'll take one & combine with some other rubber for the project car to save in shipping. I would also take a 6 cable as if that gets figured in time
Posted by: jeffdon Oct 23 2014, 09:24 AM
Forgive my stupidity, but where does the rubber bellows go? My car has never had one.
Posted by: Mikey914 Oct 23 2014, 10:30 AM
Great ! This is a smok'en deal...put me in.
JIm,
Is this a pic of my car at WCR?
Sure looks familiar.
Posted by: Mikey914 Oct 23 2014, 10:34 AM
Forgive my stupidity, but where does the rubber bellows go? My car has never had one.
Right here
Attached image(s)
Posted by: jeffdon Oct 23 2014, 11:58 AM
Forgive my stupidity, but where does the rubber bellows go? My car has never had one.
Right here
The rubber does not get drawn into the pulley and get torn up?
Thinking a silicon molded cover that fitted over the entire pulley bracket would be a good idea. Something that snapped over with no need for fastners. It would keep both the pulley and cable clean.
Posted by: wes Oct 23 2014, 12:10 PM
I in for a set with cable thanks!
Posted by: clapeza Oct 23 2014, 12:39 PM
I'll take a set without cable.
Chester
Posted by: restore2seater Oct 23 2014, 06:05 PM
I'm in for 1 without cable.
Posted by: bakerj Oct 23 2014, 06:10 PM
Two sets for me please.
Posted by: edrotol Oct 23 2014, 07:34 PM
So, I have made the end that the cable goes through as that's been running about $13 as I lost one of mine and had to replace it, so thought these were quite overpriced.
I decided to include 2 nuts as these are hard to find and using one with nylon will eventually give out over time. This happened to me at WCR 2012, and was a pain to deal with on the drive as a few of you may remember. If you tighten the 2 against each other you can get them to stay.
Also made the pulley and the NLA bushing as these tend to both wear over time. I made the replacement out of delrin and it is sturdier than the OEM eliminating any flex of the pulley.
The cable bellows is new also
Option for the cable is $18 if you want to add it. I'm bringing in cables, and will have them in a few days, the other parts are made and on the shelf
Really a great deal fro many hard to find and overpriced parts.
Bump the thread and I'll put you down for a set. let me know if you want a cable.
I will have 2 other GB's opening up soon and and you will be able to combine, one is for some interior parts that haven't been available in many years, the other is something we all can use, and is in the same area.
So, who's interested ?
one complete set for me thanks
Posted by: Mikey914 Oct 23 2014, 10:49 PM
Trying to get these posted up tonight. along with a few other items. I have one item pending that I need to get posted up, but I was awaiting Mcmark to get back to me on.
-mark
Posted by: mapguy Oct 24 2014, 12:06 AM
Just now saw this. Too late to get for one with cable?
Posted by: Mikey914 Oct 24 2014, 12:31 AM
Just now saw this. Too late to get for one with cable?
Nope,
I have been holding back on these until I can get one more GB posted so that they all can be combined to save money on shipping.
It's a cool one too. Will eliminate one more source of fluids on your garage floor.
Posted by: ndfrigi Oct 24 2014, 12:58 AM
1 set please but no cable. I have an order also for GB pedal under post 15. Please message me for payment details and what deadline for the payment. Ty!
Posted by: brant Oct 24 2014, 05:13 AM
One set with cable please
Posted by: somd914 Oct 24 2014, 05:27 AM
One set with cable please. Thanks!
Posted by: old914dog Oct 24 2014, 07:30 AM
One set with cable please. Thanks!
2 sets please.
Posted by: Niklas Oct 25 2014, 08:29 AM
3 sets no cables for me.
Posted by: 7275914911 Oct 26 2014, 12:15 PM
+1 for me w/o cable. Also on 2 other buys but don't see on the website as of last night?
Posted by: wndsrfr Oct 26 2014, 01:17 PM
One with cable for me......nice work!
Posted by: Mikey914 Oct 26 2014, 07:02 PM
All PM's sent
Posted by: Mikey914 Oct 27 2014, 02:00 PM
For those of you that may have had an issued with the cable option adding 2x, the issue is fixed.
Thanks
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)