Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Got use of a water jet tomorrow
Posted by: jeffdon Oct 27 2014, 08:07 PM
A buddy is renting water jet time tomorrow for 3 hrs. He thinks his stuff will take only a portion of the time, and has asked if I want to cut anything. I have no idea what might be a good quick project for my 914, but I do have some 1/4 steel plates, about 10" x 10" that I am itching to do something with now.
Any suggestions for potential cutting?? I can draw something up pretty quick and save in DXF formant......
Posted by: altitude411 Oct 27 2014, 08:15 PM
Any suggestions for potential cutting?? I can draw something up pretty quick and save in DXF formant......
A turbo? & can I get a copy of the dxf file?
Posted by: r_towle Oct 27 2014, 08:21 PM
Tow hooks for the front a arms
A bling 914 sign
A dashboard plate with a design in it
Custom headlight bucket covers
A circle, just cause no one will be able to figure out how you cut it perfectly
A nested set of circles....like Russian dolls, same reason as above
A custom wind chime of little 914 cars
A peace sign
Posted by: jeffdon Oct 27 2014, 08:28 PM
Tow hooks for the front a arms
A bling 914 sign
A dashboard plate with a design in it
Custom headlight bucket covers
A circle, just cause no one will be able to figure out how you cut it perfectly
A nested set of circles....like Russian dolls, same reason as above
A custom wind chime of little 914 cars
A peace sign
Circle stuff....good idea, just for the hell of it.
Posted by: PanelBilly Oct 27 2014, 08:33 PM
License plate frame
Posted by: r_towle Oct 27 2014, 08:33 PM
Drill a hole in the top edge of each one and use a fishing line to connect all of then.
Maybe run the line all the way through.
Then hang it up and when you are bored stiff at work, you can spin it around
Posted by: rick 918-S Oct 27 2014, 09:09 PM
Drill a hole in the top edge of each one and use a fishing line to connect all of then.
Maybe run the line all the way through.
Then hang it up and when you are bored stiff at work, you can spin it around
Posted by: arkitect Oct 27 2014, 10:34 PM
How about a strut wrench.
http://www.914world.com/bbs2/index.php?showtopic=242291
Any new tool would be cool.
Dave
Posted by: Marty Yeoman Oct 27 2014, 10:52 PM
I've got something for you. I'll send it along in the morning. I think you'll like it.
Posted by: revhi109 Oct 28 2014, 07:32 AM
Engine stand mount adapter. I already have the file
Posted by: bandjoey Oct 28 2014, 09:24 AM
Key rings? 
drink coasters? Wall art? Have fun!
Posted by: Marty Yeoman Oct 28 2014, 09:27 AM
PM sent.
Attached thumbnail(s)
Posted by: stugray Oct 28 2014, 09:28 AM
Rear trailer tie-downs that bolt to the rear shock mount bolt
Or some of these:
Posted by: Marty Yeoman Oct 28 2014, 01:28 PM
PM sent.
Posted by: stugray Oct 28 2014, 01:52 PM
Marty.
I recognize that piece and I would be interested in two of those as well.
Do you have a template for the rears? (see my post above).
I'd just post a pic, but dont want to be TOO obvious what I'm trying to reproduce.
Posted by: Marty Yeoman Oct 28 2014, 02:13 PM
Marty.
I recognize that piece and I would be interested in two of those as well.
Do you have a template for the rears? (see my post above).
I'd just post a pic, but dont want to be TOO obvious what I'm trying to reproduce.
Pm sent
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)