Printable Version of Topic

Posted by: d7n7master Oct 29 2014, 07:53 PM

Hi All,
Need some help (again), What size/length is the window crank screw?
thx!!

Posted by: d7n7master Oct 29 2014, 08:02 PM

Hokey Smokes!! It's made of GOLD!!
Part #: P905522
Replacement for OE #: N.014.216.1
Price: Was: $3.99 ea.

Now: $2.99 ea

Posted by: Mikey914 Oct 29 2014, 11:04 PM

Is it the same as the mirror base screws? If so I have them.
I usually throw in a set when you buy the gasket for $2.99.

Posted by: bdstone914 Oct 29 2014, 11:13 PM

PET shows 5 mm x 8mm countersunk head.
You could probably buy a 100 from Mc master carr for $3.

Posted by: bdstone914 Oct 29 2014, 11:20 PM

QUOTE(Mikey914 @ Oct 29 2014, 10:04 PM)

Is it the same as the mirror base screws? If so I have them.
I usually throw in a set when you buy the gasket for $2.99.

Posted by: Cap'n Krusty Oct 29 2014, 11:39 PM

5mm x 8mm flat head machine screw. DO NOT use anything longer! Do that and you'll find out why when you try to open the door from the inside ...

The Cap'n

Posted by: Mark Henry Oct 30 2014, 05:57 AM

It's a standard late VW (old) beetle handle screw.

Posted by: Mikey914 Oct 30 2014, 10:43 AM

I'll bring some in, so if anyone need on I can throw in for .25. Should have some money on shipping.

Posted by: Mikey914 Oct 30 2014, 01:20 PM

Got them in and listed - .40 set of 2 stainless at correct length.

http://www.shop.914rubber.com/914-Window-roller-attachemnt-screws-set-of-2-in-stainless-0142161SS.htm