Drilled gallery plug, tapped in 6mm bolt and tried to pull out with slide hammer.
The plug will not move. This is a real PITA. Does anyone have any advice?
Thanks
Most of mine came out VERY easily, a few needed a bit more, try a little more force, shouldn't be to hard though.
http://www.914world.com/bbs2/index.php?showtopic=151864&hl= is how I did mine, starts on post #15
Hope this helps
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)