My whole right rear tail light isn't working, but the left one works fine. Front right driving lights aren't working either, but left side works fine. I just got done stripping the interior and painting with POR. Could I have knocked something loose? Any ideas?
QUOTE (Hammy @ Feb 2 2005, 08:47 PM) |
Could I have knocked something loose? Any ideas? |
I don't have the fuse cover showing which fuses are for what. Which one would it be?
QUOTE (Hammy @ Feb 2 2005, 06:08 PM) |
Which one would it be? |
Which fuses go where:
http://www.pelicanparts.com/914/technical_specs/914_electrical_fuses.htm
I'd look for disconnected wires, everywhere that you touched while doing this work. Actually, everything that you've touched since they worked properly!! Loose wires, possibly, as well. Wiggle the wires and see if that makes any difference.
--DD
Thanks for that.
Ok, I've checked all the fuses and they're fine, taken them out and reinserted them-still not working.. I noticed though, that when I turn on the hazard lights, ALL the lights work properly, but when I turn on the running lights, only the left side works.
Fixed...... It wasn't the parking light fuse itself, but the wiring to the fuse.
Sorry I'm new to all this, bear with me
Good job! It's...
*fun*..
Miles
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)