Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Breather box??

Posted by: Natedog Feb 6 2005, 11:54 PM

Howdy,

I'm running dual Weber's on my 2.0 914. The heads have ports for plumbing a breather box. Would this be the right part for the job?
On aircooled.net
Part #: ECO0020

I would plumb both heads and the oil filler cap too. Right?

I finally have the car running and took it for a drive around the block. No brakes though....
Just a few more tasks....

Cheers,
Nate

Posted by: SLITS Feb 7 2005, 10:35 AM

It will work. No provision for a drain though.

Hell, we used a quart oil can.

Posted by: Rouser Feb 7 2005, 06:22 PM

QUOTE
No provision for a drain though.

The oil filler connection IS the drainback to the crankcase. I have this identical breather box and it works like a champ. Just make sure it's mounted higher than the filler connection for proper draining.

DO NOT USE the plastic-type hose included with the kit. I thought it was heat shrink tubing at first. It's a POS, kinks, and guaranteed to split wide open right after the engine warms up. Ask me how I know ...