Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Interior vinyl and carpet installation?
Posted by: falcor75 Feb 14 2015, 02:40 AM
Anyone got a good guide on how to install the interior vinyl kits?
I have the carpets mostly figured out but want to get the vinyl in place first.
Posted by: GeorgeRud Feb 14 2015, 07:46 AM
Do you mean the vinyl strips that cover the reinforcements at the front of the seats and the enter tunnel between the seats? Just glue them down with some 3M spray adhesive before installing the carpet pieces.
Posted by: clapeza Feb 14 2015, 08:27 AM
Do you mean the vinyl strips that cover the reinforcements at the front of the seats and the enter tunnel between the seats? Just glue them down with some 3M spray adhesive before installing the carpet pieces.
I used some carpet tape on mine so I could get it positioned exactly as I wanted it, sticking down one section at a time. Didn't have to worry about adhesive overspray, either.
Posted by: falcor75 Feb 14 2015, 12:49 PM
Yes I've figured the two pieces for the cross braces and the two thinner ones for the area between the backpad and the door but I have two pieces left over that I'm unsure where they go.
Posted by: Mikey914 Feb 14 2015, 01:31 PM
On my website
(Even the sides)
http://shop.914rubber.com/6-piece-floor-vinyl-kit-NEW-914FV6.htm?categoryId=-1
Attached thumbnail(s)
Attached image(s)
Posted by: falcor75 Feb 14 2015, 01:44 PM
Doh....thanks 
Posted by: Mikey914 Feb 14 2015, 07:25 PM
No problem,
It's usually the sides that get guys confused and many don't have them anymore.
Posted by: falcor75 Feb 15 2015, 02:31 AM
My car only had the narrow strips along the doors when I bought it.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)