Good morning 914 world,
I need to remove my fresh air blower assembly prior to going to paint. I have tried a search but no luck. I really only want to be able to remove the grill under the cowl so I can replace with my new one from 914rubber after paint.
Thanks
David
Remove fuel tank then pretty much everything you see behind it.
The fuel tank is out. Where are there fasteners holding the blower in place?
Thanks
There are three (or is it four?) bolts on the side that bolt UP on the top part of the blower box assembly. They are underneath the cowl. Of course you have to disconnect the control cables (take a picture so you know how they are oriented!), the 4 prong connector in the back, and the actual fresh air tubes.
Thanks everyone, I found the two screws and pulled out the fresh air blower.
David
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)