I may have thoroughly lost one of my little screws from the distributor that hold the clip and condensor.
Does anybody know what size they are?
I don't know if this would be of any help?
http://www.pelicanparts.com/914/parts/engine/distributor_big.htm
I got one out with a magnet and found a replacement for the other, it's is a little long but it won't interfere with anything.
Rip, pull the diz out next time you need to change a condenser. Do everything on the bench and you won't lose those little screws.
Good idea.
To make sure that I didn't lose them again I used a coffee filter to encircle the base of the dizzy, easy and effective.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)