I have 2 sets of stock torsion bars. 1 set that are white from a 73 car, and 1 set of red from a 75 car. Are all the stock torsion bars the same spring rate? Is there a difference between the white and red? Thanks.
Ive never encountered a OE "White" finished torsion rod off of a /4
Check the diameter (and if it's hollow, like some aftermarket).
All the 914's had 17.9mm diameter. -6 used 911 splines so the A-arms
must match the -4 or -6 bars.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)