Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ front turn signal light changing

Posted by: Schnell944 Jun 5 2003, 09:42 AM

exactly how to the lights that function as turn signals/markers up front come out? i tried pushing and turning them like the rear lights come out , but to no avail. thnx. sorry about the dumb questions until i get a manual.

Posted by: Bleyseng Jun 5 2003, 09:51 AM

The bulbs are probably rusted in, so try again. Maybe squirt some lube in there to break them loose.

Geoff

Posted by: 72Signal914 Jun 5 2003, 10:20 AM

They are push in, the bulbs are the same that are in my other car that I changed. I thought I was going to break the bulb I pulled so hard. Try wiggling it while pulling that seemed to help me get them out.

Posted by: Lawrence914-6 Jun 5 2003, 10:29 AM

Yep.. push in and rotate, then pull the bulb out. I forget which way you need to rotate them. Probably CCW.

-Rusty

Posted by: Schnell944 Jun 5 2003, 02:28 PM

thanks...in my experience, its always good to ask first b4 u break it beyond use! lol....learned the hard way